701423
7
Zoom out
Zoom in
Previous page
1/41
Next page
- 6 -
Note: One piece of CR2025 battery is provided in the remote control. Before use, please pull out the plastic
insulation sheet. When the battary has run out of power, change it according to the instruction behind the
remote control. If the remote control is not in use for a long time, please take the battery out.
Operation
Plug the appliance into an appropriate electrical outlet. Turn on the appliance by pressing the main power
switch to position “I”. A beep sound will be heard and at the meantime, the room temperature shows in the
LCD display. Press button , the fan begins to work and the display of “ ” is illuminate. The appliance
is in fan mode.
1. Mode setting
Press button “Mode” repeatedly until the desired setting is shown on the display:
Fan mode (you cannot set temperature in fan mode)
Low heat output: 1000W
High heat output: 2000W
Automatic mode
Frost protection
Automatic mode: The appliance automatically adapts the heat output according to the room temperature
to reach the set temperature.
Frost protection: The appliance begins to heat when the room temperature is below 7, and stop working
when the room temperature reaches 11. Note: Under this mode, you cannot set temperature, timer and
Horizontal rotation.
2. Temperature setting
In mode , , or , press button -or “+” to set the desired temperature. You can
choose from 6 to 38. When you set your desired temperature, the heater starts to heat when the
room temperature is below the set temperature and will stop heating as soon as the set temperature is
reached.
3. Time setting
Press button to set the desired working time: press button once, the hour indicator flashes,
press -or +” to set the hour from 0h to 23h; press button twice, the minute indicator flashes,
press “-“ or “+” to set the minitue from 1 minute to 59 minutes. The time setting is done. The appliance will
shut itself off automatically when the time is up.
You can long press the button “-“ or “+” for rapid adjustment.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio FH-212089 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FH-212089 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info