701422

Emerio FH-121976 Manual

7
Zoom out
Zoom in
Previous page
1/39
Next page
- 6 -
3. Power setting button
Under working condition, you can press button “ ” to switch the power setting between low heating power
and high heating power.
- Low heating power: Icon “ ” will be shown on the digital display.
- High heating power: Icon “ ” will be shown on the digital display.
The heater works on low heating power when the room temperature is 0-2℃ lower than the set temperature.
The heater works on high heating power when the room temperature is 4-5℃ lower than the set temperature.
4. Oscillation button
Under working condition, you can press button “ ” to activate or deactivate the swing function. The digital
display will show icon “ ” lighted on when swing function is activated.
5. Timer button
Under working condition, you can press button “ ” to set timer.
Press the button “ ” once, the appliance enters the timer setting mode. You can press “ ” to adjust the
timer from 0 – 8H (each press changes the value of one hour and “0H” means no timer). The corresponding timer
value will be shown on the digital display. The set timer will be activated in 5 seconds without any other operation
and then the digital display will show back the room temperature. The icon “ ” on the display indicates the
timer has been set. When the timer is counting down to 0 (not shown on the display), the appliance will stop
working automatically (a beep sound will be sent out) and enter standby mode.
Note:
If no operation for 10 minutes, the digital display and indicator light will go out. Press once any one of the
buttons can make the display and indicator light come back.
The heater will remain hot for some time after it is turned off; handle it with care.
REMOTE CONTROL
This unit has a remote control. One piece of CR2025 battery should be used for it. The functions of the remote
control buttons are the same as of the buttons on the control panel. Follow the illustration on the back of the
remote control to place or remove battery. Pay attention to the battery polarity when placing the battery.
SAFETY SYSTEM
The appliance has a safety system which automatically switches off the unit when overheated.
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at
least 30 minutes. Put the plug in the socket and switch on the heater.
This heater is equipped with a tilt protection safety device. For safety reasons, the unit will automatically
switch off the power if it is put on unstable or uneven surfaces or if it is tilted accidentally.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio FH-121976 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FH-121976 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info