Manual Emerio FH-117208 (page 7 of 49) (English, German, Dutch, French, Polish, Swedish)

701060

Zoom out

Zoom in

1/49

- 6 -

3. Timer / Temperature button

Timer: Press the button or to set the timer from 0 – 24hours (0 = no timer). The corresponding

timer value with a symbol “h” will be shown on the digital display. The set timer will be activated in 5 seconds

without any other operation and then the digital display will show back the set temperature.

Temperature: Press the button or to set the temperature from 15 – 35℃. The corresponding

temperature value with a symbol “

SET

℃”will be shown on the digital display. The set temperature will be

activated in 5 seconds without any other operation.

Note:

1) After timer and temperature are set, the digital display will show the set time and temperature alternatively.

If you do not set the timer and only set the temperature, the digital display will show the set temperature

only.

2) Once the timer is counting down to 0 (not shown on digital display), the appliance will stop working

automatically and enter into standby mode.

3) Once the set temperature is reached, the appliance will stop working, as well as the swing function if you

have set before. Once the room temperature is lower than the set temperature by 2℃, the appliance will

resume working automatically, as well as the swing function if you have set before. If you have set the timer,

please note the time for standby mode will not be counted as the set time.

4) This appliance begins to sense the room temperature in 10 seconds after the appliance is turned on, so even

your set temperature is already above the current room temperature, the appliance will still work for 10

seconds and then turn off automatically.

4. Power setting button

Under working condition, you can press button “ ” to switch the power setting between low heating power

and high heating power. This button is inactive when the appliance stops working.

- Low heating power: Icon “ ” will be shown on the digital display.

- High heating power: Icon “ ” will be shown on the digital display.

5. ECO button

Under working condition, you can press button “ ” to switch the appliance into ECO mode. The icon “ ”

will illuminate on the digital display. When the ECO function is operating, the button “ ” and temperature

adjustment are not active. You can press button “ ” again to exit form ECO mode.

When appliance is in ECO mode, the temperature will be set at 22℃ by default. Under this condition, when the

room temperature is lower than 18℃, the high heating power works automatically; when the room temperature

is higher than 18℃ but lower than 22℃ , the low heating power works automatically. When the room

temperature reaches 22℃, the appliance stops working automatically.

6. Fireplace illumination button

Press the button “ ” to turn on or turn off the fireplace illumination.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FH-117208 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Emerio FH-117208

Emerio FH-117208 User Manual - Dutch - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emerio FH-117208 Manual

Product: