701495

Emerio CH-102597.6 Manual

6
Zoom out
Zoom in
Previous page
1/25
Next page
- 5 -
CH-102597.6 EN
ASSEMBLY OF THE HEATER
Before using the heater, the feet (supplied separately in the box) must be fitted to
the unit. These are to be attached to the base of the heater using the 4 self-tapping
screws provided, taking care to ensure that they are located correctly in the bottom
ends of the heater side moldings.
OPERATION OF THE HEATER
Note: When the heater is turned on for the first time, or when it is turned on after a longer period of storage, it
is normal that the heater may emit some smell and fumes. This will disappear when the heater has been on a
short while.
Set the thermostat to the minimal position and insert the plug to the power supply.
Turn on the power switch: 750W, 1250W, 2000W.
Turn the thermostat knob in a clockwise direction to the max position.
Once the room temperature has reached the desired value, turn the thermostat knob slowly in anti-
clockwise direction until you hear a "click" sound; this is the setting temperature.
The appliance will automatically maintain the setting temperature. It will switch on when the room
temperature is below the setting, and switch off if it is above the setting.
CONVECTOR HEATER WITH THERMOSTAT AND FAN
This heater incorporates an internal fan, to be switched independent from the heating elements.
Press the switch to turn on the fan. The fan will only operate with the thermostat in the on position. It can
be used when the heating elements are on to blow warm air into the room. In warm conditions the fan can be
used with the heating elements off to blow cool air into the room.
SAFETY SYSTEM
The appliance has a safety system which automatically switches off the unit when overheated, for example, due
to the total or partial obstruction of the vents. In this case, switch off the appliance, remove the plug from the
socket. Let it cool down for about 30 minutes and remove the object which is obstructing the vents. Then put
the plug in the socket and switch on the heater. It should now operate normally.
CLEANING THE HEATER
1. Always unplug the heater from the wall socket and allow it to cool down completely before cleaning.
2. Clean the outside of the heater by wiping with a damp cloth and with a dry cloth.
3. Do not use any detergents or abrasives and do not allow any water to penetrate the heater.
STORING THE HEATER
When the heater is not used for a long time it should be protected from dust and stored in a clean dry place.
TECHNICAL DATA
Supply voltage: 220-240V ~ 50-60Hz
Power consumption: 2000W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio CH-102597.6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio CH-102597.6 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info