701432
6
Zoom out
Zoom in
Previous page
1/37
Next page
- 5 -
on the screen and will be changed as the appliance works. The logo is also displayed to indicate the
appliance is sending out air flow. To turn the appliance off, just press the ON/OFF button again.
4. Choose and set below functions as you want.
Air flow speed selection:
Press the speed selection button to choose air flow speed, the corresponding speed level logo will be
shown on the screen: LOW (logo " ”) MIDIUM (logo ”) HIGH (logo ”) LOW (logo
" ”)… in turn.
Swing function and air flow direction:
Press swing button to make the air flow swing left and right; press it again to cancel the swing and fix the
air flow at a specific direction horizontally. The logo is shown on the screen when the louver
swings.
To adjust the air flow direction vertically, just lift up or press down the louver outside.
Cooling:
Press the cooling button to start the cooling function. The logo will be shown on the screen. Press
again the button to cancel the function. This function is only effective when the water tank has ice pack(s)
inside. Do not activate this function when the water in the water tank is below the “MIN” level; add
enough water into the water tank first.
Mode selection:
Press the mode selection button to choose the running mode from Sleeping mode Natural mode
Normal mode … (Repeating).
1) Normal mode: under this mode, the motor works with the preset speed, and the logo “ is
displayed. You can press the speed button to choose speed Low /Medium /High.
2) Natural mode: under this mode, the logo ” is displayed. The appliance runs according to the
natural mode program. It is generating softer and more comfortable air flow, you will feel like the wind
from the nature. You can press the speed button to choose Low /Medium /High natural wind.
3) Sleeping mode: under this mode, the logo is displayed. The appliance runs according to the
sleeping mode program. Air flow will weaken with the decrease of body temperature when you fall
asleep, which will protect you from catching cold. You can press the speed button to choose Low
/Medium /High sleeping wind.
Timer Setting:
Press the timer setting button to start the timer setting, you can set the appliance to automatically turn
itself off in 1 hour /2 hours/ 3 hours/…/11 hours /12 hours (maximum setting). Continuously press the
button to select the desired running time for the appliance. When the digital display shows “00”, no
operation for several seconds, and the timer will be canceled.
Ion mode:
Press the Ion mode button to activate the ionizer function. The logo “ is displayed when this function
is activated. Ions attract tiny particles in the air such as dust, pollen and mold spores etc. which cause
them to become too heavy to remain airborne. This feature allow us to have clean air in the environment.
NOTES:
1. It is recommended to change water and clean water tank frequently.
2. Activating the cooling function with insufficient water may cause malfunction of the water pump.
3. Do not take out the water tank immediately after the appliance is just turned off. Wait several minutes to
avoid the water dripping out from the cooling pad.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio AC-123227.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio AC-123227.1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info