571143
26
Zoom out
Zoom in
Previous page
1/43
Next page
Emdeon Vx570 User’s Guide
Chapter 3: Customize Your Terminal Setup
© 2011 Emdeon Business Services LLC. All rights reserved.
Page 22
This material contains confidential, proprietary information. Unauthorized use or disclosure of the information is strictly prohibited.
Set a Card Swipe Default
The Administrator can designate a default card swipe transaction. Doing so allows the user to swipe the
card from the Welcome screen to run an ID card swipe search for that transaction. You would want to
designate your most frequently-run card swipe transaction as your card swipe default.
Note: To run an ID card swipe search for a transaction not designated as the default, you will select the
ID Card # search type from the transaction’s Search Type menu, then swipe the card at the ID Card #
prompt. See Card Swipe (not configured for idle swipe) on page 32 for more information.
Only those transactions that support an ID card swipe search can be set as the card swipe default.
To set a card swipe default:
Step Terminal Display Action
This procedure begins from the Emdeon idle state If the main menu or screen saver is displayed, see Terminal Displays on page
11
1
WELCOME TO EMDEON
SWIPE CARD
OR PRESS ANY KEY
Press any key (except 3).
2
MM/DD/YY HH/MM
Medical
Address Verify
i
Financial
Press <Scroll Page
i
> to page down.
3
h
Setup
Press <F1> to select Setup.
4
Config
Enter Admin Passcode:
Enter your Administrator passcode, and press
.
Your password will display as asterisks as you type.
5
Setup
Manage Users
Manage Providers
i
Communications
Press <Scroll Page
i
> to page down.
6
h
Manage Hot Keys
Reports
Terminal
i
Date/Time
Press <Scroll Page
i
> to page down.
7
h
Swipe Defaults
About
Press <F1> to select Swipe Defaults.
8
SELECT SWIPE PAYER:
FLORIDA
GEORGIA
ILLINOIS
INDIANA
i
IOWA
Note: your actual payer list may vary.
The list that displays lists all of the payers that support an ID Card #
search type.
Highlight the name of the payer you wish to set as the card swipe default:
· Press <Scroll Page
i
> or <Scroll Page
h
> to scroll screen by
screen.
· Press <Scroll Line
i
> or <Scroll Line
h
> to scroll line by line.
· To move to the first payer beginning with a specific letter, press
the number key which displays the letter. Press one, two, or
three times depending on the letter’s position on the key.
· Press
to select the payer.
9
Swipe Defaults
Setting Swipe Payer
to
payer name
(displays briefly...)
If the payer supports more than one type of transaction, go to step 8; otherwise, go to step 9.
10
SELECT SWIPE TRANS:
ELIGIBILITY
CLAIM STATUS
Note: your actual transaction list may
vary.
Press <Scroll Line
i
> or <Scroll Line
h
> to highlight
the name of the transaction which you wish to set for a
default swipe.
You must select a transaction type that supports an ID
Card # search as a search type; typically, this will be
the Eligibility transaction.
Press
to select the payer.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emdeon VeriFone Vx570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emdeon VeriFone Vx570 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info