371118
33
Zoom out
Zoom in
Previous page
1/40
Next page
30
-- FM MODE --
STATION: 1
FREQ: 101.70 MHz
MODE: MANUAL
INPUT STATION
It also appears on the VFD:
INPUT
When the digit 1 pressed, OSD appears:
--- TUNER MENU ---
-- FM MODE --
STATION: 1
FREQ: 101.70 MHz
MODE: MANUAL
SAVE TO 1
Also the VFD appears:
SAVE TO 1
After a while, OSD appears:
-- FM MODE --
STATION: 1
FREQ: 101.70 MHz
MODE: MANUAL
And VFD appears:
FM 1 101.7 M
Press
again the FREQ goes up higher frequency.
The program of the frequency spotted goes to
broadcast. With the same way above go on to do the
next frequency searching. To get an optimum of
receiving broadcast you can press or for a fine
frequency adjustment of the program broadcasting,
and the result of which can be kept by pressing
ENTER/PLAY on the remote control.
After saving you can run any digit of 1~20, in each of which
one FREQ frequency broadcasting has been saved, to
listen to the broadcast of the FM frequencies
corresponding with what you have ever saved.
Press (NEXT) or (PREVIOUS) turns in next
higher or previous lower FREQ station.
NOTES:
You can save up to 20 frequencies.
Machine will save the frequencies for later use.
VFD of the machine will display the saved message being
played when the TUNER is on.
The FM frequency range: 87.5 – 108MHz
Frequency-step = 50KHz
For a good reception the FM antenna is required and that
have to be put in an optimum location.
RDS PS FUNCTION (Radio Data
System Program Service station name)
The name of the RDS station now being received
instead of the frequency will display on the VFD.
e.g.: BBC R3
NOTE:
This function can be used under Tuner mode only.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eltax dr 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eltax dr 110 in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info