Manual Elta em 200 (page 7 of 21) (English)

362125

Zoom out

Zoom in

1/21

PROGRAMMING YOUR

ESPRESSO MACHINE

The Cuisinart

Programmable Espresso Maker

has programming capabilities. Based on café

settings, the

single and

double

espresso functions are set at 1.5 and 3.0 oz.

However, by following a few simple steps, you

can pre-program your perfect serving size down

to the ounce.

Programming

Single Espresso

1. Prepare the portafilter holder with the one cup

filter basket (8) and fill with finely ground

espresso (9). Using the tamping tool, tamp

the coffee grinds (10), or use a single pod of

espresso coffee with the pod filter holder.

Secure the portafilter holder to the brew head

(11-12).

2. Place a cup under both pouring spouts.

3. To begin programming press the program

button. The light around the program button

will show a constant blue light.

4. Press the

single espresso button once to

start the espresso pour (13).The light around

the

single espresso button will flash.

5. Allow the espresso to pour until it reaches the

desired level. Once that is reached, stop the

espresso pour by pressing the

single

espresso button. A beep will signify that the

new setting for the

single espresso

operation has been

programmed and

stored in the machine’s

memory.

6. The espresso machine

will then return to

normal operation mode and is ready to make

another espresso at the push of a button.

Programming

Double Espresso

1. Prepare the portafilter holder. Fit it with the

two-cup filter basket (8) and fill with finely

ground coffee (9). Using the tamping tool,

tamp the coffee grinds (10). Secure the

portafilter holder to the brew head (11-12).

2. Place two cups under both pouring spouts.

3. To begin programming press the program

button. The light around the program button

will show a steady blue light.

4. Press the

double espresso button once

to start the espresso pour (14). The light

around the

button will flash.

5. Allow the espresso to pour until it reaches the

desired level. Once that level is reached, stop

the espresso pour by pressing the

double espresso button. A beep will signify

that the new setting for the

double

espresso operation has been programmed

and stored into the machine’s memory.

6. The espresso machine will then return to

normal operation mode and is ready to make

another espresso at the push of a button

Resetting the Factory Settings

To revert to the original factory settings:

1. Press the program button once.

2. Press and hold down the manual button

and program.

3. Continue holding down manual and program

buttons for approximately 3 seconds or until

you hear 2 beeps. When you hear the 2

beeps, the light around the

and

buttons will flash, and after that, the program

light becomes solid. The espresso machine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elta em 200 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elta em 200 Manual

Product: