563146
34
Zoom out
Zoom in
Previous page
1/41
Next page
9.2 VIDEO SETUP
Select Video in the setup menu, and display the Video submenu:
9.2.1 Aspect Ratio
4:3: Choosing this setting if your DVD player is connected to a normal ratio TV. You can fill the movie to the entire screen
of your TV. This might mean that parts of the picture (the left and right edges) won’t be seen.
16:9: Choose this setting if your DVD player is connected to a wide screen TV. If you choose this setting and you don’t have
a wide screen TV, the images on the screen may appear distorted due to vertical compression.
Notes: The image display ratio is related to the recorded disc format. Some disc can not display images in the aspect
ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the left and
right side of the screen. You must adjust the screen setting depending on the type of the television you have.
9.2.2 View Mode
With this option you can select the different video vision mode on the screen.
9.2.3 TV System
This product supports output of various system, including AUTO, NTSC, PAL.
If your TV set has only NTSC or PAL system, the screen will blink and become colorless when a wrong system is selected. In
this case, press the N/P button on the Remote Control to switch the TV TYPE.
Note: For more information of output format, refer to the instructions or your TV set.
9.2.4 Video Output
Selecting the Video Output setting to switch between different video outputs
Component: Set the video output to interlacing component output.
RGB: Set the video output to SCART output. If you select SCART connection, you should set up the play mode as RGB
state, then it will output normally.
P-Scan: Set the video output to progressive component output
HD: Set the video output to high definition output
Note1: When the player is connected to a TV set of progressive scanning though YPbPr, select P-SCAN. When it is
connected to a common TV set, select Component.
If TV screen has no output after selecting P-SCAN, you can press V-MODE button to switch the state, it will output
normally.
If you select SCART connection, you should set up the play mode as RGB state, then it will output normally.
If you select HDMI connection, you should set up the play mode as HD state, then it will output normally.
Note2: Set video output type to “Component”, “RGB” or “P-Scan”.
HD resolution menu should be disabled.
HDMI should stop working
HD JPEG mode menu should be disabled.
Note3:Set video output type to HD.
HD resolution menu should be enabled and set to “Auto” responding to this action.
•“HD/Res.” key is valid to switch HD resolution only at this case.
HDMI module can work only at this case.
No CVBS at HD resolution
No OSD and sub-picture at HD-JPEG mode
34
02-8847MP4N-GB 4/26/06 2:50 PM Page 34
Downloaded from www.Manualslib.com manuals search engine
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elta 8847MP4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elta 8847MP4 in the language / languages: English, German as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info