563146
28
Zoom out
Zoom in
Previous page
1/41
Next page
Warning:
Do not connect any amplifier with coaxial connector that does not contain Dolby digital AC 3 or DTS decoder. Any attempt to
do so and play of DVD disc will result in damaging your speakers and causing possible hearing injury. Other than DVD disc,
VCD and CD can be operated normally without conforming to the above restriction.
Setting of TV system
If you find the image like non-fully zoomed picture, brim picture covered or black & white picture etc, please select PAL or NTSC
by systems setting or press N/P button to switch the TV system on the remote control. This DVD disc is capable of supporting
different scales picture, as a result, non-full zoomed picture could appear or picture be partially covered on user’s TV set.
5. FUNCTION OPERATION
5.1 Function Buttons On the Front Panel
These button’s function is the same as the corresponding buttons on the remote control. For the detail information, please see
the following texts.
5.2 Function Buttons On the Remote Control
STANDBY
Press the button once and the player will go into standby state. Press the button again and the player will resume Operating as
before.
USB/CARD
Press the button to choice USB disk or Card memory source input.
Note: The button is available while the player is in stop or no disc state.
OPEN/CLOSE
To open the disc tray, press OPEN/CLOSE; To close the disc tray, press OPEN/CLOSE again.
AUDIO
Press the button to choose different dubbing languages. (Requires disc support)
SUBTITLE
Press the button to display different captions (Requires support from disc)
SEARCH
For DVD discs, press the button to choose the desired title and chapter and search the desired title time and chapter time.
For Super VCD, VCD, CD discs, press this button to search the desired disc time and track time and choose the desired track
0-9 keys
These keys are used to input the time, as well as title, chapter and track numbers.
When a numeric item is displayed on the screen, press the 0-9 keys to select the desired entry, and press ENTER to confirm.
When a CD or VCD is playing (with PBC off), press the 0-9 keys to select a track directly, then press ENTER to confirm.
CLEAR
Press CLEAR to delete numbers you have entered. Press once to delete one digit, press and hold to delete all digits.
MENU
During DVD playback, press MENU to display the disc menu of the current title.
Note: This function is subject to the disc
SETUP
Press the button to enter the system setting menu. press the button again to exit the menu.
DISPLAY
Press the button to show the information of the current playing disc.
28
02-8847MP4N-GB 4/26/06 2:50 PM Page 28
Downloaded from www.Manualslib.com manuals search engine
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elta 8847MP4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elta 8847MP4 in the language / languages: English, German as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info