163838
40
Zoom out
Zoom in
Previous page
1/58
Next page
5. TA/AF BUTTON
TA Function [traffic Announcement] Button(for Rds Only)
In RADIO mode
When pressed briefly, it is activated in TA mode ON or OFF .
During radio operation in one FM frequency band the search for a traffic announcement station is started automatically
(TA SEEK).
If an FM station is being received which transmits the latest traffic announcements, the TP display lights up.
If an FM station is being received which transmits the latest traffic announcements, CD operation is automatically
interrupted (the word TRAFFIC appears in the display).
The volume level is increased to the minimum value for the transmission of traffic announcements. After the traffic
announcements have finished, the program that was previously running is resumed.
AF [Alternative Frequencies]
When pressed long, it is activated in AF mode ON or OFF.
Segment off: AF switching mode off. (Long press the AF button again)
Segment on: AF switching mode on, the radio continuously tests the signal strength of the AF frequency. Whenever the
new AF frequency is stronger than the station that is currently tuned into, the radio switches to this frequency for a
short time and the message “NEW FREQUENCY” is displayed for one to two seconds.
Segment flashing: AF switching mode is selected, but RDS information is not received yet.
Press and hold the SEL button to access the selection menu:
REG ON/ REG OFF, PI MUTE/PI SOUND, AF OFF/ AF ON.
Regional mode ON
PI CODE is checked when AF CHECK in progress
Regional mode OFF
PI CODE and COVERAGE AREA is not checked when AF check in progress.
6 - 7 - 8 - 9 - 10 - 11. PRESET STATION
• To memorize the current frequency, press any one of the six preset buttons [1-6] on the front panel or on the remote
controller hold for more than 2 seconds.
• To recall the preset memory, press one of the preset buttons [1-6].
• Press 1/TOP (6) button to select the first track/chapter to play.
In the state of VCT/CD/MP3 disc playing, press the button on the front panel to select the first track/chapter to play.
(depend on the disc used for VCD).
In the state of DVD disc playing, the 1TOP button is not available.
• Long press 2/RPT (7) button to select repeat mode as follow.
DVD: VCD:
Continuously repeat at the current chapter/track, when selected REP-ONE mode.
Select REP-ALL mode to continuously repeat all chapter/track, on the current disc.
REPEAT feature does not support VCD2.0 (with PBC ON).
• Long Press 3/INT (8) button to scan disc. In the state of CD disc playing, press the 3/INT button to play the previous 6
seconds part of each track/chapter on disc (depend on the disc used for VCD). In the state of Mp3 disc playing, the 3/INT
button is not available. In the state of VCD disc playing, long press the 3/INT button, the screen will display as follow
(long press it again will release this mode.):
1. You can use the / / / buttons on the remote control to select the item, and then press the ENTER button to
confirm.
40.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elta 7550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elta 7550 in the language / languages: English, German as an attachment in your email.

The manual is 16,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info