506463
13
Zoom out
Zoom in
Previous page
1/99
Next page
25. 24.
MP3 CD PLAYBACK
1 Set the FUNCTION selector to CD / MP3 / USB / SD position. The display shows “- - -” for a
moment.
2. Open the CD compartment manually with the recessed grip OPEN; OP is displayed.
3. Insert an MP3 CD with the label up and close the CD compartment again manually. The display
shows MP3, ► and 001 and playback starts automatically. The corresponding track number is
displayed.
4. In case playback does not start (depending on the disc), please press PLAY / PAUSE to
start playback of the first track manually.
5. Press PLAY / PAUSE to pause playback; press again to continue playback. In pause mode
► flashes.
6. Press STOP to stop playback; the display shows again the total number of tracks.
Notes: MP3 CD playback is also stopped when:
a. opening the CD compartment;
b. sliding the FUNCTION selector to RADIO or TAPE / OFF positions;
c. all tracks on the MP3 CD have been played.
Skip Mode
In playback mode press SKIP- or SKIP+ to skip to the previous or next track.
1. Select the track in playback, stop or pause modes with SKIP- or SKIP+ and start playback by
pressing PLAY / PAUSE.
2. Press SKIP+ repeatedly to skip to the next track(s), until the desired track number is displayed.
3. Press SKIP- once to skip to beginning of the current track.
4. Press SKIP- repeatedly to skip to the previous track(s).
5. Press ALBUM to display the corresponding album and select a track with SKIP- or SKIP.
Fast Forward And Rewind
Press and hold SKIP+ or SKIP- to access fast forward or rewind functions through the track to
search for a certain position.
Program Playback
Up to 20 tracks can be programmed in your desired sequence; any track can be programmed more
than once.
1. Before programming, please press STOP and MODE. The display shows P01 and PROG.
2. Select the first desired track with SKIP+ or SKIP-.
3. Save the track with MODE. P02 and PROG flash in the display. Now select the next track.
4. Repeat steps 2 and 3 to save further tracks, the maximum number of tracks is 20.
5. Press PLAY / PAUSE to start playback of the tracks in your desired sequence.
Delete Program
Follow these steps to delete the program:
1. Open the CD compartment.
2. Set the FUNCTION selector to RADIO or TAPE / OFF positions.
3. Press STOP.
Notes for CD-R / CD-RW users:
Depending on CD burner, make of CD and burner speed, reading problems may occur.
Playback Modes
Several playback modes are available on the unit; press MODE to access and select.
1. Press MODE once to repeat the current track. The display shows REP besides track number,
MP3 and ►.
2. Press MODE twice to repeat the tracks in the current album. The display shows REP and
ALBUM besides track number, MP3 and ►.
3. Press MODE three times to repeat the disc in its original sequence. The display shows REP ALL
besides track number, MP3 and ►.
4. Press MODE four times to play all tracks on the disc once in random sequence. The display
shows RAND besides track number, MP3 and ►.
5. Press MODE again to return to normal playback mode. The display shows again track number,
MP3 and ►.
Playback From USB Device Or SD Memory Card
The CD player can play MP3 music files from USB device and SD memory cards. Connect the USB
device to the USB port on top of the player or insert the SD memory card in the SD slot on top of the
player.
Set the FUNCTION selector to CD / MP3 / USB / SD position. You have the same playback
functions as you have in MP3 CD playback. Please read details in the previous chapters MP3 CD
Playback, Skip Mode, Fast Forward And Rewind, Program Playback, Delete Program and Playback
Modes.
CASSETTE OPERATION
Insert Tape
1. Set the FUNCTION selector to TAPE / OFF position.
2. Press STOP / EJ. to open the cassette deck.
3. Insert a tape and close the deck manually.
Playback
1. Set the FUNCTION selector to TAPE / OFF position.
2. Insert a tape as described above.
3. Press PLAY ◄ to start playback. Playback stops automatically at the end of the tape.
4. Press VOLUME + / - to set the desired volume.
5. Press STOP / EJ. to stop playback prior to the end of the tape.
Fast Forward / Rewind
1. Press RWD to activate rewind function of the tape.
2. Press F.FWD to activate fast forward function of the tape.
3. Press STOP / EJ. to stop fast forward / rewind.
Record
Please ensure the write protection tab is still in place.
Press REC to simultaneously activate PLAY ◄. If the inserted tape is write-protected both
buttons will not lock in place and no recording is possible.
Side A
Side B
Downloaded from www.Manualslib.com manuals search engine
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elta 6733 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elta 6733 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info