THIS CD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER, THIS CD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM, WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE. BE
SURE TO OPERATE THE CD PLAYER CORRECTLY AS INSTRUCTED.
INVISIBLE LASER RADIATION WHEN COVER IS OPEN OR THE SECURITY INTERLOCK DEFEATED. DO
NOT EXPOSE TO BEAM!
DO NOT TOUCH THE LASER LENS.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE USE ONLY
THE RECOMMENDED ACCESSORIES.
Installation
Avoid installing the player in areas of:
1) direct sunlight or heating radiators or closed automobiles;
2) high temperature or high humidity;
3) excessive dust;
4) excessive vibration, as the internal parts may be seriously damaged.
Foreign Objects or Fingers in the Device
NEVER allow anyone, especially children, to put objects into the holes, slots or openings on this device. This
may lead to death due to electric shock.
Avoid Magnetic Objects:
To avoid interferences keep magnetic objects, such as speakers, at a distance from the player.
Stacking
Place the player in an upright position. Do not place the player on amplifiers or other equipment, which may
heat up.
Condensation
If there is moisture inside the player, it may not operate properly. Please turn off the power supply and wait
about one hour for the moisture to evaporate.
CAUTION
13. SERVICING - The user should not attempt to service the unit beyond that described in the user operating
instructions. All other servicing should be referred to qualified service personnel.
14. CLEANING - Disconnect from mains power supply before cleaning. Do not use liquid or spray cleaners,
only use a damp cloth. Follow the care and maintenance instructions in this manual.
15. LIGHTNING - During lightning and longer periods of non-use please disconnect from mains power supply
and antenna.
16. SAFETY CHECK -
After servicing the unit ask the customer service for a safety check.
17. OVERLOAD - To avoid fire and electric shock do not overload wall outlets and convenience receptacles.
18. ELECTROSTATIC DISCHARGE -
Disconnect from mains power supply and remove batteries if unit
malfunctions. Reconnect after a short time.
