536726

Elro HIS20SF Manual

51
Zoom out
Zoom in
Previous page
1/62
Next page
49
Password, and then the ‘Enter’ button. If User
password is correct, an indication of ‘Night Arm’ will be
shown on the LCD screen:
,
User Password
By pressing , the programmed exit delay will be
overridden to 5 seconds.
Note: Once the system is in Night Arm, the ‘ARM’ LED
is flashing on and off alternatively.
PARTIAL ARM
Remote Control:
Press the ‘Night Arm’ button, , enabling the Smart
Home Box to enter ‘Night Arm’. Press the ‘Night Arm’
button again to enter ‘Partial Arm’.
Smart Home Box:
Toggle the ‘Night Arm’ button between ‘Night Arm’ and
‘Part-Arm’. When ‘Part-Arm’ appears, input the User
Password and then the ‘Enter’ button. If the User
Password is correct, an indication of ‘Part-Arm’ will be
shown on the LCD screen.
,
User Password
By pressing , the programmed exit delay will be
overridden to 5 seconds.
Note: Once the system is in Partial Arm, the ‘ARM’
LED is flashing on and off alternatively.
DISARM
To disarm the Smart Home Box, using either the
Remote Control or the Smart Home Box as follows:
Remote Control:
Press the ‘DISARM’ button, .
Smart Home Box:
,
User Password
If the system is disarmed and the ‘ALARM
MEM/MESSAGE’ LED is flashing with the panel
beeping every few seconds, this indicates that an
alarm condition has occurred. Use the Event Log to
find out and make a note of where the alarm occurred
to assist in tracing the cause of the alarm.
QUICK SET
The following lists a series of quick set functions by
using digit buttons. Please make sure the Smart
Home Box is in DISARM mode before you operate
them.
Countdown Shortening
To shorten the countdown time in 5s, overriding the
programmed exit delay.
Press
User Password
This allows the system enters Fully Arm Mode.
Chime
Press to toggle the Chime facility between ON
and OFF.
Note: If the Chime is ON and the system is then armed,
the Chime will remain ON even though the system is
disarmed later.
Mute
Press to toggle the Mute facility between ON
and OFF.
Note: If the Mute is ON, no voice guidance will be
made during operation. If the mute is OFF, voice
guidance will be active. However, if ‘LINE STATUS’
LED illuminates while the mute is ON, there is no voice
guidance will be available.
GREEN CONTROL FUNCTION
Press to enter green control selection function,
and use the and buttons to select desired
green control to be executed, and then press .
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HIS20SF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HIS20SF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info