536726

Elro HIS20SF Manual

45
Zoom out
Zoom in
Previous page
1/62
Next page
43
Scroll through available options, (Curtain Switch,
Dimmer and Switch Device ) until the required model
type is displayed and then
Press to save and exit, or
Press to exit without saving.
Note: If model type is selected incorrectly, the device
will not function properly.
Control Status
Scroll through the menu until ‘:6 Control Status’ is
displayed.
Default setting: OFF
To change the setting press .
Press to enable the green control, or
Press to disable the green control.
Press to save and exit, or
Press to exit without saving.
Note: ON implies enable whereas OFF implies disable.
The default setting will switch to ON automatically once
code learning is completed.
Control Delete
Scroll through the menu until ‘:7 Control Delete’ is
displayed.
To change the setting press .
Press to delete the group, or
Press to retain the group.
Note: Once “delete” is selected, the green control
(receiver) is removed together with any setting that is
related to the green control.
Green Remote/Sensor
For transmitter type of devices, scroll through the menu
until ‘6-2 Green Remote/Sensor’ is displayed.
Enter device number (1-32) to be configured and
press .
Code Learning
This enables the Smart Home Box learns ID from
Green Remote/Sensor.
Scroll through the menu until ‘:1 Learning ID’ is
displayed and press .
Press learning key 3 seconds on the transmitter to emit
ID code to the Smart Home Box instantly.
Three possibilities would happen as follows:
Learning OK – the ID code was learned by the Smart
Home Box successfully.
Time Out – the time for ID code learning is 30s.
During this time, if the Smart Home Box failed to
capture the ID code emitted by transmitter, it would
result in overdue programming.
ID Duplicate – the same ID code was learned by the
Smart Home Box beforehand.
Device Status
This sets the Green Remote/Sensor is to be enabled or
disabled. Scroll through the menu until ‘:2 Device
Status’ is displayed.
Default setting: OFF
To change the setting press .
Press to enable the Green Remote/Sensor, or
Press to disable the Green Remote/Sensor.
Note: ON implies enable whereas OFF implies disable.
The default setting will change to ON automatically
once code learning is completed.
Device Deletion
To delete the device, scroll through the menu until ‘:3
Device Delete’ is displayed.
To change the setting press .
Press to delete the device, or
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HIS20SF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HIS20SF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info