536726

Elro HIS20SF Manual

37
Zoom out
Zoom in
Previous page
1/62
Next page
35
Press to delete the character under the cursor.
Press and hold to erase the entire phone
number.
UNIT ID NUMBER
This helps central monitoring station set an ID number
for the user whose system is connected to their center.
Scroll through the menu until ‘:3 Unit ID No:’ is
displayed. The current setting will also be displayed.
To change the setting press .
Enter the ID number (4 digits max. ranging from 0-9,
B,C,D,E, F)
Press to save and exit, or
Press to exit without saving.
Notes:
Press and then 1, a ‘B’ will be presented.
Press and then 2, a ‘C’ will be presented.
Press and then 3, a ‘D’ will be presented.
Press and then 4, an ‘E’ will be presented.
Press and then 5, a ‘F’ will be presented.
When pressing for 3 seconds, it will return to
numbers.
CALL ATTEMPTS
This sets the maximum number of times that the dialer
will attempt to contact the central monitoring station.
If the dialer contacts to the central monitoring station
once successfully, it will stop dialing.
Default setting: 3
Scroll through the menu until ‘:4 Call Attempts’ is
displayed. The current setting will also be displayed.
To change the setting press .
Enter the required number (1-5).
Press to save and exit, or
Press to exit without saving.
ARM/DISARM BY USER
This determines when user makes a selection for
disarming (Open) or arming (Close) the system, an
event code 401 is needed to be sent to the central
monitoring station. When setting to ‘On’, an event
code 401 will be emitted, setting to ‘Off’, an event code
401 won’t be emitted.
Default setting: OFF
Scroll through the menu until ‘:5 ARM/DISARM By
User’ is displayed. The current setting will also be
displayed.
To change the setting press .
Press to commence sending the event code.
Press , event code will not be sent.
CYCLIC TEST
This function allows you to set the time interval for the
dialer to report to the central monitoring station.
Default setting: Disable
Scroll through the menu until ‘:6 Cyclic Test’ is
displayed. The current setting will also be displayed.
To change the setting press .
Scroll through available options, (Disable, 6 Hours,
12 Hours and 24 Hours), until the required setting is
displayed.
Press to save and exit, or
Press to exit without saving.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HIS20SF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HIS20SF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info