536726
25
Zoom out
Zoom in
Previous page
1/62
Next page
Code Learning
Pressing , or button on the remote
control will enable the Smart Home Box to learn the ID
code.
Scroll through the menu until ‘:7-1 Learning ID’ is
displayed.
Three results would turn up after learning as follows:
Learning OK – the ID code was learned by the Smart
Home Box successfully.
Time Out – the time involved for learning the ID code is
60s. During this duration, fail to press the button
on the remote control would result in overdue
programming.
ID Duplicate – the same ID code was learned by the
Smart Home Box beforehand.
Panic Switch
This feature, if enabled, allows the Smart Home Box to
alarm when the panic switch on the remote control is
pressed in case of an emergency.
Default setting: ON
Scroll through the menu until ‘:7-2 Panic’ is displayed.
To change the setting press .
Press to enable the function of Panic Switch,
or
Press to disable the function of Panic Switch.
Status
This enables the remote control to control the Smart
Home Box in the event that the remote control was lost
unexpectedly.
Default setting: ON
Scroll through the menu until ‘:7-3 Status’ is displayed.
To change the setting press .
Press to enable the function of remote control
or
Press to disable the function of remote control.
Delete Remote Control
In case of unexpected factors, this facility allows you to
delete the remote control setting from the Smart Home
Scroll through the menu until ‘:7-4 Del data’ is
displayed.
To change the setting press .
Press to delete the remote control setting, or
Press to keep the same setting.
Press to return to the top level User-Setup
menu.
Note: After the system enters the programming mode,
if no further programming setting is taken within 10
minutes, the system will return to disarm mode
automatically.
Note: By means of either using PC or Smart Home
Box’s keypad to enter the programming mode, the
system will enter disarm mode first then programming
mode in sequence.
Box.
23
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HIS20SF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HIS20SF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info