536725
23
Zoom out
Zoom in
Previous page
1/34
Next page
DIGITAL DIALER SETUP
Scroll through the menu until ‘4-2 Digital Dial Setup’ is displayed and press
Note: After completing the Digital Dialer Setup press to return to the top
level programming menu.
PHONE NUMBER
Scroll through the menu until ‘:1 Phone No:’ is displayed. The current setting
will also be display.
To change the setting press .
Enter the phone number (32 digits max. ranging from 0~9, *, #, ).
Press to save and exit, or
Press to exit without saving.
Notes:
Press to insert a 3.6s pause in the dialing sequence.
Press to move the cursor left.
Press to move the cursor right.
Press to delete the character under the cursor.
Press and hold to erase the entire phone number.
UNIT ID NUMBER
This helps central monitoring station set an ID number for the user whose
system is connected to their center.
Scroll through the menu until ‘:2 Unit ID No:’ is displayed. The current setting
will also be displayed.
To change the setting press .
Enter the ID number (4 digits max. ranging from 0-9, B, C, D, E, F)
Press to save and exit, or
Press to exit without saving.
-21--44-
INITIAL TESTING
As the system is initially installed it is recommended that each device is tested in
turn as it is installed, (refer to testing instructions for particular device).
TESTING AN INSTALLED SYSTEM
The Control Panel has a programmed test routine. You may test the system at
any time, however it is recommended that the system is tested at regular
intervals not exceeding 3 months.
With the system in Disarm Mode
Press This puts the system into Test Mode.
User Password
Use the and buttons to scroll through the menu and press to select
the displayed test function or sub-menu.
Note: After completing all required test functions, press to leave Test mode
and return to Disarm mode.
WALK TEST
Before commencing testing, please ensure that there is no movement in any PIR
protected area, all doors/windows protected by Magnetic Contact Detectors are
closed and that all battery covers and housings are correctly fitted.
Scroll through the top level Test Mode menu until ‘WALK TEST’ is displayed and
press . ‘Walk Test Waiting’ will be displayed.
1. Trigger each detector on the system by either walking into a PIR protected
area or by opening a door/window protected by a Magnetic Contact detector.
As each detector is triggered the Control Panel will chime to indicate that an
alarm signal has been received and the identity of the zone that the detector
is configured for will be displayed.
2. Operate detector anti-tamper switches by opening the case of the device. As
the switches are operated the Control Panel will chime and zone name will be
displayed.
3. Activate each button on the Remote Control in turn. As each button is pressed
the Control Panel will chime and the button name will be displayed. (e.g.
‘REMOTE CONTROL DISARM’).
Press to exit Walk Test and return to the top level Test Mode menu
TESTING THE SYSTEM
ENEN
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HA68S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HA68S in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro HA68S

Elro HA68S Quick start guide - English - 1 pages

Elro HA68S Quick start guide - German - 1 pages

Elro HA68S User Manual - German - 34 pages

Elro HA68S Quick start guide - Dutch - 1 pages

Elro HA68S User Manual - Dutch - 34 pages

Elro HA68S Quick start guide - French - 1 pages

Elro HA68S User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info