483275
29
Zoom out
Zoom in
Previous page
1/34
Next page
REPLAY USER MESSAGE
Scroll through the menu until ‘:5 Replay User Message’ is displayed.
Press to replay the user message. Press to exit.
CODE LEARNING FROM REMOTE CONTROL
Each user has his own remote control. This enables the control panel to learn
the specific code from each remote control.
Scroll through menu until ‘:6 Remoter’ is displayed and press .
CODE LEARNING
Pressing button on the remote control will enable the control panel to learn
the ID code.
Scroll through the menu until ‘6-1 Learning ID’ is displayed.
Three possibilities would happen as follows:
Learning OK – the ID code was learned by the Control Panel successfully.
Time Out – the time involved for learning the ID code is 60s. During this
duration, fail to press the button on the remote control would result in
overdue programming.
ID Duplicate – the same ID code was learned by the Control Panel beforehand.
Use another remote control for code learning.
ALARM ALERT
This allows the user to decide whether the built-in siren in the control panel will
be activated when pressing the panic switch on the remote control.
Default setting: ON
Scroll through the menu until ‘6-2 Siren’ is displayed.
To change the setting press .
Press to enable the Siren, or Press to disable the Siren.
Note: If enabled, the operation of siren will depend on the respective setting on
‘System Setup. If disabled, all of the sirens won’t be activated despite the
‘System Setup’ being enabled.
DELETE REMOTE CONTROL
In case of unexpected factors, this facility allows you to delete the remote
control setting from the Control Panel.
Scroll through the menu until ‘6-3 Del data’ is displayed.
To change the setting press .
Press to delete the remote control setting, or
Press to keep the same setting.
Press to return to the top level User-Setup menu.
-27--38-
Press to save and exit, or Press to exit without saving.
PARTIAL ARM 1
This controls whether the zone is active when Partial Arm 1 is armed.
Default setting: OFF
Scroll through the menu until ‘6: Partial Arm 1’ is displayed. The current
setting will also be displayed.
To change the setting press .
Press to enable the Zone in Partial Arm 1, or
Press to disable the Zone in Partial Arm 1.
PARTIAL ARM 2
This controls whether the zone is active when Partial Arm 2 is armed.
Default setting: OFF
Scroll through the menu until ‘:7 Partial Arm 2’ is displayed. The current
setting will also be displayed.
To change the setting press .
Press to enable the Zone in Partial Arm 2, or
Press to disable the Zone in Partial Arm 2.
MAGNETIC CONTACT DETECTOR
This allows the control panel to be notified as to whether the magnetic contact
detector is active or inactive when the system is disarmed.
Default setting: ON
Scroll through the menu until ‘:8 Magnetic O/C Detector’ is displayed. The
current setting will also be displayed.
To change the setting press .
Press to enable the Magnetic Contact Detector, or
Press to disable the Magnetic Contact Detector.
AUTO REPORT
This feature, if enabled, allows the detector to be feed back the latest status to
the Control Panel periodically.
Default setting: ON
Scroll through the menu until ‘:9 Auto Report’ is displayed. The current setting
will also be displayed.
ENEN
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HA68 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HA68 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro HA68

Elro HA68 Quick start guide - English - 1 pages

Elro HA68 Quick start guide - German - 1 pages

Elro HA68 User Manual - German - 34 pages

Elro HA68 Quick start guide - Dutch - 1 pages

Elro HA68 User Manual - Dutch - 34 pages

Elro HA68 Quick start guide - French - 1 pages

Elro HA68 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info