621095
9
Zoom out
Zoom in
Previous page
1/23
Next page
- 17 -
The general operations are as follows:
▲▼◄►
Press these buttons to select the items. The display will scroll left/right if the selected item is not shown on the screen.
Numeric
Press these buttons to select the camera.
COPY ( )
Press this button to copy all the settings - excluding detailed Motion settings, Video Loss settings, Title/Audio - of the focus
camera to all the following cameras. (eg. focus camera is 1, its settings will be copied to those of cameras 2-4.)
ESC
Press this button to escape from this screen, and return to Setup Menu display. If the Save dialog is shown, press ENTER to
exit and save, ESC to exit without saving.
The following is a brief description for each item and its specifi
c operations:
Title The title (Max. 8 characters) of this camera. Please follow the Text Input method described in Section 4.1 to modify
this item.
Video Loss Settings.. used to setup the action settings when video loss is detected for this camera. Press ENTER in
Settings.. to call up Video Loss Setup display for the camera. Please refer to Section 6.2.1
for the details.
Motion Detection – whether the motion detection of this camera is enabled or not. Press ENTER or +/- to check/uncheck this
item. The default setting is ˇ
ˇˇ
ˇ - checked.
Motion Settings.. used to setup the motion settings for this camera. Press ENTER in Settings.. to call up Motion Setup
display for the camera. Please refer to Section 6.2.2
for the details.
Covert covert or not. If the camera is covert, the video of this camera can only be seen if the user has logged in as
Administrator. Press ENTER or +/- to check/uncheck this item. The default setting is “
- unchecked.
Call By Eventwhether to switch the call monitor to the video of this camera if certain event occurs for this camera. There
are 4 options, including Off, Motion, Alarm, Both (Motion & Alarm). Press +/- buttons to select one.
Dwell Time the dwell time if Call By Event is set to Motion, Alarm, or Both. Press +/- buttons to adjust the value (3-60
seconds, discrete).
Audio the AUDIO IN corresponding to this camera. If selected, the audio data for the selected AUDIO IN will be
recorded with the video data for this camera. Press +/- buttons to select none (N/A) or the AUDIO Inputs (1/2). The default
setting is “N/A”.
Record Quality the record quality for this camera. Press +/- buttons to select the value (1-9, with 1 the lowest (rough)
quality, 9 the highest (fine) quality).
Event Record IPS the IPS (Images Per Second) for this camera if certain event (Motion, Alarm) occurs for this camera.
This camera will be recorded at this rate for Post-record time since the event occurs. (Please refer to the following sections for
Post-record time.) Press +/- buttons to select the value (0 – 25 (PAL) / 30 (NTSC), discrete).
Pre-record IPS – the pre-record IPS for this camera if certain event (Video Loss, Motion, Alarm) occurs for this camera. This
camera is recorded at this rate for Pre-record time before the event occurs. (Please refer to the following sections for
Pre-record time.) Press +/- buttons to select the value (0 Event Record IPS for this camera, discrete). Please note that the
total Event Record IPS / Pre-record IPS should not exceed the system recording capacity (NTSC: 120/CIF, 60/Half-D1,
30/Full-D1; PAL: 100/CIF, 50/Half-D1, 25/Full-D1), or the system will lower the actual rate automatically at recording.
Normal Record IPS the normal record IPS for this camera. This camera will be recorded at this rate if no event occurs.
Press +/- buttons to select the value (0 – Pre-record IPS for this camera, discrete).
6
.2.1 Video Loss Setup
In Camera Setup, press E
NTER to call up Video Loss Setup of the selected camera as shown when the highlighted option is Video
Loss Settings of the camera to setup. The Video Loss Setup allows the administrator to define how the system responds to the
detected video loss for the camera.
The general operations are as
follows:
Press these buttons to select the items.
N
umeric
Press these buttons to select the camera.
- 18 -
C
OPY ( )
Press this button to copy the Video Loss settings of the focus camera to all the following cameras. (eg. focus camera is 1, its
Video Loss settings will be copied to those of cameras 2-4.)
ESC
Press this button to escape from this screen, and return to Camera Setup display. If the Save dialog is shown, press ENTER
to exit and save, ESC to exit without saving.
The following is a brief description for each item and its specific operations:
D
uration response duration to define at most how long (in seconds) the Alarm Out relay and the Buzzer will keep being
triggered after video loss is detected for this camera. However, the Alarm Out relay and the Buzzer will be reset immediately
once the camera returns to normal. Press +/- buttons to adjust the value (3-60 seconds, discrete).
Pre-record to define how long before video loss is detected this camera shall be intensively recorded at Pre-record IPS.
Press +/- buttons to adjust the value (0-10 seconds, discrete). Please note that the actual pre-record time may be shorter than
the value set if the total size of the pre-record pictures exceeds the pre-record buffer size of the system.
Alarm Out – to define which Alarm Output will be triggered when video loss of this camera is detected. Press +/- buttons to
select none (N/A) or one of the Alarm Outputs (1-2).
Buzzer – to activate the internal Buzzer or not when video loss of this camera is detected. Press ENTER or +/- to
check/uncheck this item. The default setting is “ˇ
ˇˇ
ˇ ” - checked.
Log – to log to event logs or not. Press ENTER or +/- to check/uncheck this item. The default setting isˇ
ˇˇ
ˇ ” - checked.
Screen Message to display the event message on the screen or not. Press ENTER or +/- to check/uncheck this item. The
default setting is “ˇ
ˇˇ
ˇ ” - checked.
E-mailto send the event e-mail to remote station or not. The e-mail will be sent to the predefined receivers at the moment
when the event is triggered. Press ENTER or +/- to check/uncheck this item. The default setting is “
” - unchecked.
6
.2.2 Motion Setup
In Camera Setup, press E
NTER to call up Motion Setup as shown when the highlighted option is Motion Settings.. of the camera
to setup. The Motion setup allows the administrator to define how the system responds to the detected motion for the camera.
The general operations are as f
ollows:
Press these buttons to select the items.
N
umeric
Press these buttons to select the camera.
COPY (
)
Press this button to copy the Motion settings, including Detection settings, of the focus camera to all the following cameras.
(eg. focus camera is 1, its Motion settings will be copied to those of cameras 2-4.)
E
SC
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro DVR154S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro DVR154S in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro DVR154S

Elro DVR154S User Manual - German - 24 pages

Elro DVR154S User Manual - Dutch - 22 pages

Elro DVR154S User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info