- 6 -
4.4 Second monitor connection (DV50-P1M2)
The second monitor must be connected to the WiFi monitor with the cable (equipped with a
plug on both sides) to "J11 INDOOR OUT". The cable should be connected to the second
monitor at "J3 OUTDOOR IN". On the last monitor in a series, in this case the second, the small
white switch 1 should be in the ON position.
4.4 Extend cable at your own risk
If the connecting cable is too short and you want to extend it, this is at your own risk.
Always use a similar cable, 4 core 0.3 mm². Please note that the cable cannot be extended by
more than 10 meters. Cut the plug with a piece of cable, strip the wires and solder them to the
extension (max. 10 m). Then solder the extension to the existing cable. Insulate the solderings
with insulating tape, do not use clamps or other types of terminal blocks.
(*) If you choose to use a completely new or existing cable, make sure that it is no longer than
20 meters and that the individual wires have a thickness of at least 0,3 mm² and no more than
0,5 mm².
