708692
4
Zoom out
Zoom in
Previous page
1/4
Next page
-3- -4-
Installing your IP video doorphone
A: Mounng the outdoor unit (surface mount only)
1. Take the rainshade and use it to mark the drilling
holes on your wall. Make sure that you are able to
reach this place from the back with the 4-wire
connecon cable (and the door lock cable if
applicable) to link it to the monitor. We recommend
a mounng height of between 1,35 and 1,70 meters.
Try to avoid direct sunlight or rain as much as
possible.
2. Put the 4-wire cable through the rectangular hole in
the rainshade and connect the cables to slots
number 1-4:
- 1 Audio wire – green
- 2 Ground wire – blue
- 3 Video wire – brown
- 4 Power wire – black
The cable has no special connector, so you can also
use any exisng 4-wire cable that is min. 4 x 0,5mm².
We recommend keeping the length of the cable to a
maximum of 30 meter to avoid complicaons.
3. Oponally, link an electric door lock to port 5 and
port 6. For connecng a door lock, always use
2 x 1,0 mm² cable. Please refer to the wiring
diagrams in the secon “Adding a door lock” for
more wiring opons to either the outdoor unit or the
indoor monitor.
4. Fix the rainshade with the screws and dowels
supplied with the set; take out the name plate paper,
write down your name and put it back in.
5. Put the outdoor unit into the rainshade and fix it
with the inbus screw.
B: Mounng the indoor monitor
6. Use the mounng bracket to mark the drilling holes
on your indoor wall and fix it to the wall so that the
4-wire cable and the power cable (plus oponally
an extra wire for door/+gate lock) can go through
from the back.
7. Connect the 4-wire cable to the slots number 1-4 in the same order as you did for the
outdoor unit and then connect the power adapter cable to the indoor monitor and
hang it on the bracket.
C: Connecng the System to the App
8. Download the ELRO Intercom app from the Google Play Store for Android devices or
from the Apple App Store for iPhones.
9. Make sure that your mobile phone and the indoor monitor are using the same WiFi
network. Plug the adapter into a wall socket to power the system and wait for a beep.
10. Open the app and press the “+” buon to add the new device. Follow the “Smart
Konfig” instrucons in the app. Keep your WiFi password available.
11. If pairing fails, return the indoor monitor to factory sengs
by pushing the door unlock key for min. 5 seconds; then try again.
12. You are now ready to receive calls on your mobile phone, both
inside and outside of your home WiFi network.
C: Mulple users
13. Oponal: If more users want to access this doorphone on their own mobile phones,
they just need to download the app and add a device through QR Code. To do this, go
to device sengs/QR Code and let them scan your specific device QR code from the
app on your phone.
Door unlock
1,35 - 1,7m
1 2 3 4 5 6
Press the
connector
fully in,
to connect
the cable
1 Audio - green
2 Ground - blue
3 Video - brown
4 Power - black
1 3 42
DV447WIP
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro DV447WIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro DV447WIP in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro DV447WIP

Elro DV447WIP User Manual - German - 4 pages

Elro DV447WIP User Manual - Dutch - 4 pages

Elro DV447WIP User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info