708693
4
Zoom out
Zoom in
Previous page
1/4
Next page
-3-
Installaon
A: Mounng the Outdoor unit
1. Take the rainshade and use it to mark the drilling
holes on your wall. You can choose between baery
operaon and adapter power. Using the door lock
feature is only possible when using the adapter to
power the outdoor unit. Make sure that you can
reach this place from the back with the power
adapter cable and, if applicable, with the door lock
cable. We recommend a mounng height of
between 1,35 and 1,70 Meters. Try to avoid direct
sunlight and rain as much as possible.
2. Put the power adapter cable through the rectangular
hole in the rainshade and fix the rainshade with the
screws and dowels supplied with the set; take out
the name plate paper, note your name and put it
back in.
3. Insert the lithium baery in the outdoor unit and/or
connect the power cable to the outdoor unit:
For adapter power: RED cable to slot 1 and WHITE
cable to slot 2, put the outdoor post into the
rainshed and fix it with the inbus screw. Then plug
the adapter into the wall socket.
B: Acvate the indoor monitor and pair the devices
4. Insert the lithium baery in the indoor monitor and/or plug the USB adapter into the
monitor. With the USB adapter, you can charge the lithium baery or connuously
operate the indoor monitor.
5. Press and hold the power buon on the right side of the monitor for 3 seconds to
acvate it. The monitor will then show “welcome” on the screen.
6. Now press the power buon 4 mes in quick succession; “pairing” wil be shown on
the screen to indicate the monitor is in pairing mode.
7. With a small needle, press the code buon on the backside of the outdoor unit and
the 2 devices will be paired.
1,35 - 1,7m
-4-
Operang the door intercom
To use the system, the indoor monitor must be switched ON; even if it goes into standby
mode. You can disnguish standby mode from completely switched OFF by the LED
indicator on the top of the indoor monitor, which will light up in blue in acve mode and
flash in blue every 4 seconds in standby mode.
Long pressing the power buon will turn the unit ON or OFF completely, short pressing
will put it into or wake it up from standby mode. You can also turn the unit on by pressing
any of the 4 buons on the front. Aer 30 seconds of inacvity it will automacally enter
standby mode again.
When you are in live view (either by pushing the LIVE VIEW buon, or because someone
rang the doorbell), you can enter the talk mode by pushing the TALK buon or take a
picture by pushing the PHOTO TAKING buon. A photo will be taken automacally when a
call is not answered within 5 seconds.
To unlock the door, push the DOOR UNLOCK buon in live view mode.
Sengs:
To adjust the sengs, the indoor unit must be turned on. Outside live view, but with the
monitor turned on, you can use the UNLOCK buon to enter the sengs menu and also
switch to the next seng parameters, which will appear in following order:
→ language sengs → Date and me sengs → Ringtone/volume sengs →
Unlock me seng → PIR seng
With the PLUS buon, you can change the language and ringtone, go up in me and date
or choose the unlock me (1-6 seconds). With MINUS, you can go down in me and date
and adjust the ringtone volume. To switch between hours-minutes-year-month-date, use
the PHOTO TAKING buon. To acvate and deacvate the mute funcon on the monitor,
press and hold the TALK buon for 3 seconds and the music icon on the display will show
either green or red.
To adjust the brightness, color intensity and talk volume, you need to be in talk mode and
then press the LIVE VIEW buon, which will also bring you to the next parameter. PLUS
and MINUS will change the values between low (0) and high (7).
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro DV044RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro DV044RF in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro DV044RF

Elro DV044RF User Manual - German - 4 pages

Elro DV044RF User Manual - Dutch - 4 pages

Elro DV044RF User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info