708665
2
Zoom out
Zoom in
Previous page
1/3
Next page
Adding the HOME Outdoor Siren to the Home Alarm System AG4000:
The Alarm Panel itself has a set function that has the default setting of Wireless Siren (Indoor and Outdoor) as
“Disabled”. For the Siren to be paired successfully this need to be changed to ‘Enable’.
The way of doing this is as follows:
Press PIN + 04 + PARM key to enable the wireless siren for pairing function.
After this, the user will see the number 0 on the panels keypad light up, this indicates that the Panel / Siren is
ready for pairing.
IMPORTANT
If the number 0 doesn’t light up, please press digital number 0 + PARM to enable & save the pairing function.
1. Set the alarm panel to Disarm mode.
2. On the siren, press the learning key for more than 3 seconds and release. The Learning LED will flash
repeatedly once every second.
3. Within 30 seconds, on the alarm panel, enter the PIN + DISARM Key.
4. Refer to table below for binding results:
Binding outcome
Indicator on Siren
Status
Successful
LED
Learning LED blink once
Sound
Beep once
Failed
LED
Learing LED flash 3 times
Sound
Beep rapidly 3 times
Mounting the Outdoor Siren:
Mount the siren on a wall outside the home :
- in a position that is clearly visible and at a height which is inaccessible to an intruder.
- where it receives sufficient sunlight
- on a flat surface so that the rear tamper switch is not easily activated.
- at least 1 meter away from any external or internal metalwork which can affect its radio transmission
Use the back plate as a template to mark the mounting holes on the wall. Drill the position of the mounting holes.
Fix the back plate to the wall using the plastic wall plugs and fixing screws provided.
Once the back plate has been secured, attach the main unit down onto the back plate and fasten the screw at the
base. Note: removing the main unit from its back plate will cause the Tamper alarm to sound. Quickly disarm the
alarm panel if this happens.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro AG40SR11B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro AG40SR11B in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro AG40SR11B

Elro AG40SR11B User Manual - German - 3 pages

Elro AG40SR11B User Manual - Dutch - 3 pages

Elro AG40SR11B User Manual - French - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info