614464
23
Zoom out
Zoom in
Previous page
1/30
Next page
21
1
4
2
3
4
2
q
w
e
r
z x
cv n
m
q
w
q Pattern selector:
w Presser foot: Buttonhole foot
e Thread tension: 1–5
r Stitch length:
Buttonhole
To adjust buttonhole stitch density:
Set the stitch length dial between 0.5 and 1.0 to adjust
the buttonhole stitch density.
1 Carefully mark buttonhole length on fabric.
Place the fabric under the foot with the buttonhole
marking running toward you.
2 Slide both threads to the left.
Line up the foot with the top mark on the fabric.
Lower the needle into the garment where the
buttonhole is to start, and lower the foot.
3 Set the pattern selector dial at “ ”.
Sew forward until you reach the front marking q of
your buttonhole.
Stop sewing at a left stitch.
4 Set the pattern selector dial at “ ”.
Sew 5 stitches. Stop sewing at a right stitch.
5 Set the pattern selector dial at “ ”.
Sew until you reach the back marking w of the
buttonhole.
Stop sewing at a right stitch.
6 Set the pattern selector dial at “ ”.
Sew a few bartacks and raise the needle from the
fabric.
Set the stitch length dial to “0” and the pattern selector
dial at straight sewing.
Sew a few locking stitches.
7 Remove the fabric from the machine and cut the
sewing thread. Insert a pin inside the bartack.
Then cut the opening with a seam ripper.
Take care not to cut the stitches.
b
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna SewFun at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna SewFun in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna SewFun

Elna SewFun User Manual - English, German, French - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info