703984
40
Zoom out
Zoom in
Previous page
1/48
Next page
36
q
w
e
y
r
t
u
SECTION 4.
TAKING CARE OF YOUR MACHINE
Cleaning the Bobbin Case and the Hook
Note :Turn off the power switch and/or unplug the
machine.
To dismantle shuttle race unit:
Raise the needle to its highest position and open
the hook cover.
Open the hinged latch of bobbin case and take it
out of the machine.
Open the hook race ring holders and remove the
shuttle race ring.
Remove the hook.
*Clean the hook race with a brush and a soft dry
cloth.
q Bobbin case
w Shuttle race ring holder
e Shuttle race ring
r Shuttle
t Shuttle race
To assemble shuttle race unit:
Shuttle the hook by the center pin and fit it
carefully back into the shuttle race, forming a
perfect circle with the shuttle driver.
Attach the shuttle race ring making sure the
bottom pin fits into the notch.
Lock the shuttle race ring by turning the holders
back into position. Insert the bobbin case.
y Pin
u Notch
Cleaning the Feed Dog
Remove the needle and the presser foot.
Remove the needle plate setscrew and remove
the needle plate.
With a brush, clean out dust and lint clogging the
feed dog teeth.
Reset the needle plate.
q Setscrew
CAUTION:
Turn off the power switch and/or unplug the
machine before cleaning the feed dog.
q
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna Sew Green at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna Sew Green in the language / languages: English, German, French as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info