614473
46
Zoom out
Zoom in
Previous page
1/100
Next page
40
Zipper Insertion
CAUTION:
When sewing with the zipper foot, make sure to use
pattern 01 (straight stitch with the center needle
position). Otherwise the needle may hit the foot and
possibly break.
Machine Settings
q Pattern: #01
w Presser foot: Zipper foot E
e Needle thread tension: 2–6
q
w
q we
Lapped Application
Lapped zippers are usually inserted into a side
seam of skirts or pants, for example.
Use zipper foot E instead of standard metal foot A.
Attach the pin q on zipper foot E to the groove w on
the shank.
•To sew the left side of the zipper, attach the zipper
foot on the right-hand side.
•To sew the right side of the zipper, attach the zipper
foot on the left-hand side.
Fabric Preparation
Add 1 cm (3/8˝) to the zipper size. Use this
measurement and mark the opening for the zipper.
Place right sides of fabric together and sew the
seam located below zipper placement. (Make sure
to reverse sew the stitches directly below the
zipper placement.)
Increase stitch length to 5.0 and baste the zipper
opening closed. Press the seam and basting seam
open.
Open zipper and place it face down on the seam
allowance. Teeth are on the seam line and zipper
top is 1 cm (3/8˝) from fabric top edge. Attach foot
with left side pin. Baste zipper in place, sewing
from bottom to top.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna Lotus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna Lotus in the language / languages: English, German, French as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna Lotus

Elna Lotus User Manual - English - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info