614473
12
Zoom out
Zoom in
Previous page
1/48
Next page
10
w Reversestitchbutton
When stitches (01, 05, 06) are selected, the
machine will sew in reverse while the reverse stitch
button is pressed.
If you press the reverse stitch button when stitch
pattern 01, 05 or 06 is selected and the foot control
is not connected, the machine will sew in reverse as
long as the button is pressed, and the machine will
stop when the button is released.
If you press the reverse stitch button when sewing any
other stitches except (02, 18), the machine will
immediately sew locking stitches and automatically
stop.
e Auto-lockbutton
When stitches (01, 05, 06) are selected, the
machine will sew immediately sew locking stitches
and automatically stop when the auto-lock button is
pressed.
If you press the auto-lock button when sewing any
other stitches, the machine will sew locking stitches at
the end of the current pattern and automatically stop.
r Needleup/downbutton
Press this button to bring the needle up or down.
The machine will stop with the needle up or down
depending on the machine setting (see page 20).
t ThreadCutterButton
Press this button to trim the threads after sewing.
The thread cutter sign will blink y while the machine
cuts the threads.
You can continue sewing without pulling the bobbin
thread up after trimming the threads.
To trim the threads automatically after the sewing,
select the desired stitch pattern, then press and hold
the thread cutter button until the thread cutter sign
appears u.
The machine will automatically stop and trim the
threads after locking stitches when the reverse or
auto-lock button is pressed.
* To cancel the auto-thread cutting, press and hold
the thread cutter button until the thread cutter sign
disappears.
NOTE:
Use the thread cutter on the face cover if the thread
is #30 or thicker.
MachineOperatingButtons
q Start/Stopbutton
Lower the presser foot lifter.
Press the start/stop button q to start the machine.
The machine starts running slowly for the first few
stitches; it then runs at the speed set by the speed
control slider.
Press the start/stop button q again to stop the
machine.
NOTES:
•Themachinerunsslowlyaslongasyoupressand
hold the start/stop button q.
•Thestart/stopbuttonq cannot be used when the
foot control is connected to the machine.
q
w
e
r t
y
u
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna Lotus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna Lotus in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna Lotus

Elna Lotus User Manual - English, German, French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info