614473
8
Zoom out
Zoom in
Previous page
1/48
Next page
6
WARNING:
While in operation, always keep your eyes on the
sewing area and do not touch any moving parts
such as the thread take-up lever, handwheel or
needle.
Always turn off the power switch and unplug from
the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control, otherwise
the machine will run inadvertently.
SECTION II. GETTING READY TO SEW
ConnectingthePowerSupply
•Usingthefootcontrol
Turn off the power switch q.
Pull the foot control cord from the foot control.
Insert the foot control plug w into the foot control jack e.
Insert the machine plug r into the machine inlet t.
Insert the power supply plug y into the wall outlet u.
Turn on the power switch q.
The foot control sign i will be displayed when the foot
control is connected to the machine.
q Power switch
w Foot control plug
e Foot control jack
r Machine plug
t Machine inlet
y Power supply plug
u Wall outlet
i Foot control sign
•Usingthestart/stopbutton
Turn off the power switch q.
Insert the machine plug w into the machine inlet e.
Insert the power supply plug r into the wall outlet t.
Turn on the power switch q.
q Power switch
w Machine plug
e Machine inlet
r Power supply plug
t Wall outlet
NOTES:
•Themachinewillbeinitializedwhenturningonthe
power switch. Do not touch the machine while the
machine is being initialized.
•Thestart/stopbuttondoesnotworkwhenthefoot
control is connected.
BeforeUsingYourSewingMachine
Before using your sewing machine for the first time,
place a scrap of fabric under the presser foot and run the
machine without thread for a few minutes. Wipe away
any oil which may appear.
OperatingInstructions:
The symbol “O” on a switch indicates the “off” position
of a switch.
For appliances with a polarized plug (one blade wider
than the other): To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not modify the plug in any
way (U.S.A. and Canada only).
* Foot control model 21371 is used with this sewing
machine.
q
w
e
t
u
y
r
i
q
e
t
r
w
NOTE:
Do not pull the cord of foot control beyond the red
marker on the cord.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna Lotus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna Lotus in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna Lotus

Elna Lotus User Manual - English, German, French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info