704005
50
Zoom out
Zoom in
Previous page
1/64
Next page
48
Pintucking
Sewing
z Sew the folded edge while guiding it along the guide
line.
q Right side of fabric
w Folded edge
e Guide line on the needle plate
x Open the fold at and press the pintucks to one side.
* After you nish sewing, return the upper knife to the
original position (activated).
q Left needle thread tension dial
w Right needle thread tension dial
e Upper looper thread tension dial
r Lower looper thread tension dial
t Chaining nger switch knob
y Upper knife release knob
u Stitch length dial
i Differential feed dial
o Lower looper pre-tension setting slider
* Refer to page 10 for details on how to remove the
needle.
* Refer to page 11 for details on how to adjust the
stitch length.
* Refer to page 11 for details on how to adjust the
difference ratio.
* Refer to page 12 for details on how to deactivate/
activate the upper knife.
* Refer to page 13 for details on how to adjust the
chaining nger switch knob.
CAUTION
Make sure to turn the power switch off before
changing the needle, deactivating/activating the upper
knife or setting the chaining nger switch knob.
w
q
e
r
t
y
u
i
o
q
w
e
z
x
Machine Setting
Lower looper
pre-tension
setting slider
STD.
Standard setting
of tension dials
Left
needle
Right
needle
Upper
looper
Lower
looper
- 4 5-7 2-4
Stitch length dial R
Differential feed
dial
1.0
Chaining nger
switch knob
R
Upper knife Deactivated
Needle
Use the right needle:
HA-1 SP No. 14 or No. 11
Needle thread Synthetic: No. 80 - 100
Upper looper
thread
Synthetic: No. 80 - 100
Lower looper
thread
Synthetic: No. 80 - 100
Fabric Light weight, knit fabric
NOTE:
You may need to adjust the thread tension
depending on the type of fabric and thread being
used.
If the tension balance on the test piece is not
satisfactory, you can adjust the thread tension with
the thread tension dial.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXtend 864 air at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXtend 864 air in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXtend 864 air

Elna eXtend 864 air User Manual - German - 64 pages

Elna eXtend 864 air User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info