614486
139
Zoom out
Zoom in
Previous page
1/152
Next page
135
Problem
Slipping layers
The cloth is not feeding
smoothly.
The machine does not run.
Crunching sound occurs
when running the machine.
Patterns are distorted.
The automatic buttonhole
stitches are not balanced.
Pattern selection keys do
not work.
Threads frequently bunch
up on the underside of the
stippling design pattern.
Cause
1. The dual feed foot is not being used for sewing hard to feed
material.
1. The feed dog is packed with lint.
2. The dual feed foot is not being used for sewing hard to feed
material.
3. The stitches are too fine.
4. The feed dog is lowered.
1. The machine is not plugged in.
2. A thread is caught in the hook race.
3. A faulty foot control is plugged in while the machine is turned
on (buzzer sounds once when plugging in).
4. The start/stop button is used for ordinary sewing with the foot
control plugged in.
1. Something is caught between the carriage and the arm.
2. The carriage is hitting something around the machine
3. The power is turned on when the feed dog is lowered.
1. The needle thread tension is too loose.
2. The stitch length is not suitable for the fabric being sewn.
3. Feed balancing dial is not properly set.
4. Interfacing is not used for sewing stretch and very fine
fabrics.
5. The embroidery hoop attaching knob is loose.
6. The embroidery hoop is hitting something around the
machine.
7. The fabric is not stretched tightly enough on the embroidery
hoop.
8. The fabric is caught or trapped when sewing embroidery.
9. The embroidery foot is trapped by a jump thread.
10. The embroidery foot stumbles on a mound of embroidery
threads.
1. The stitch length is not suitable for the fabric being sewn.
2. The feed balancing dial is not set properly.
3. Interfacing is not being used with stretch fabric.
1. The electronic control circuit is not working correctly.
2. The key position is out of alignment
1. The minimum length of the jump thread cutting is too short.
Reference
Use the dual feed
foot.
See page 132.
Use the dual feed
foot.
Make stitches longer.
See page 91.
See page 6.
See page 132.
Replace the foot
control.
See page 8.
Remove the object.
See page 96.
It is initializing sound,
not a defect.
See page 36.
See page 35.
See page 95.
Use an interfacing.
See page 105.
See page 96.
See page 104.
Stop the machine
and free the fabric.
Trim the jump thread.
Adjust the foot height
(see page 126).
See page 42.
See page 95.
Use an interfacing.
Turn the switch off
and turn it on again.
See page 88.
See page 126.
To carry the sewing machine, hold the carrying handle with your hand, and support the sewing machine with the other
hand.
Clean the outside of the machine with a soft cloth. Do not use chemical solvents.
Store the machine in cool and dry place.
Do not store the machine in a area of high humidity, near a radiator or in direct sunlight.
The power supply cord, foot control and embroidery hoops can be stored in the semi-hard fabric cover.
Make sure to store the embroidery carriage arm before turning off the power switch.
139


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXpressive 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXpressive 900 in the language / languages: English as an attachment in your email.

The manual is 32,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info