703999
119
Zoom out
Zoom in
Previous page
1/138
Next page
115
CUSTOMIZING MACHINE SETTINGS
Embroidery mode settings
Press the embroidery setting mode key (refer to page 76).
q
Auto thread tension
The auto thread tension level can be adjusted with the
“+” or “–” key. Increase the value when using the same
threads on the bobbin and needle.
w
Low bobbin thread warning
The low bobbin thread warning level can be adjusted with
the “+” or “–” key.
Set the level to 3 or 4 when using thick threads for
stitching lace designs or quilting. To turn this option off,
press the “–” key until “OFF” shows in the window.
Press the next page key to go to the next menu.
e
Maximum embroidery speed
The maximum embroidery sewing speed can be set from
400 to 800 spm in 100 spm intervals by pressing the “+”
or “–” key. (Sewing speed can be varied with the speed
control slider even while running the machine.)
NOTE:
Reduce the sewing speed when sewing patterns with
narrow zigzag stitches that tend to warp at high speeds.
r
One stitch stop on/off
When this function is turned on, the machine sews one
stitch and stops automatically so that you can bring the
bobbin thread up before sewing.
t
Consecutive color grouping on/off
If an imported stitch data le or design les of a pattern
combination contain consecutive sections in the same
color, these sections are automatically grouped together
as one section when opening the le or saving the pattern
combination as the le or going to the ready to sew
window. This function is invalid when combining the built-
in designs and external sourced designs.
Turn this option off if you do not wish to group the
sections together.
Press the next page key to go to the next menu.
y
Hoopconrmationon/off
The hoop conrmation message will appear every time
before opening the ready to sew window. However you
can turn this option off by selecting off.
u
Hoop calibration
You can calibrate the center position of the hoops.
You need to enter embroidery mode before opening the
embroidery setting window.
Extend the carriage arm and press the YES key.
u
-1 YES key
The carriage moves to the center position.
Press the hoop selection key to open the hoop selection
window.
u
-2 Hoop selection key
Select the hoop and attach it to the carriage. Set the
template in the hoop. Adjust the hoop position by pressing
the jog keys so that the needle is right above the hole in
the template and press the OK key.
Press the next page key to go to the next menu.
u
-2
q
w
e
r
t
u
y
u
-1
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXpressive 850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXpressive 850 in the language / languages: English as an attachment in your email.

The manual is 13,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXpressive 850

Elna eXpressive 850 User Manual - German - 138 pages

Elna eXpressive 850 User Manual - French - 138 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info