703999
32
Zoom out
Zoom in
Previous page
1/138
Next page
28
Utility Stitches
Straight stitches
Patterns U1 to U5 are straight stitches for seaming. Press
the pattern selection key for the desired stitch.
NOTE:
When sewing ne fabrics with straight stitch, select
patterns U1, U2 or U3, and use straight stitch needle
plate (optional item) for better sewing result (refer to
page 20).
Starting to sew
Place the fabric next to a seam guide line on the needle
plate. Lower the needle to the point where you want to
start.
Pull the needle thread towards the rear and lower the
foot.
Press the start/stop button or foot control to start sewing.
Gently guide the fabric along the seam guide line letting
the fabric go naturally.
q
Start/stop button
NOTES:
Pull the needle thread to the left when using satin
stitch foot F or automatic buttonhole foot R.
After using auto thread cutting or threading the
bobbin holder, you can start sewing without
drawing up the bobbin thread. However, you need
to pull the needle thread towards the rear.
Sewing from the edge of thick fabric
The black button on the zigzag foot locks the foot in the
horizontal position.
This is helpful when you start sewing at the extreme edge
of thick fabrics or for sewing across a hem.
Lower the needle into the fabric at the point where you
wish to start sewing.
Lower the foot while pushing in the black button. The foot
is locked in the horizontal position to avoid slipping.
After a few stitches, the black button is released
automatically.
w
Black button
Changing sewing direction
Stop the machine and raise the presser foot lifter to raise
the presser foot.
Pivot the fabric around the needle to change the sewing
direction as desired.
Lower the presser foot.
Start sewing in a new direction.
Turning a square corner
To maintain a 5/8˝ seam allowance after turning a square
corner, use the cornering guide on the needle plate.
Stop sewing when the front edge of fabric reaches the
cornering guide lines.
Raise the presser foot lifter and turn the fabric 90
degrees.
Lower the presser foot.
Start sewing in the new direction.
e
Cornering guide
q
w
5/8˝
e
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXpressive 850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXpressive 850 in the language / languages: English as an attachment in your email.

The manual is 13,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXpressive 850

Elna eXpressive 850 User Manual - German - 138 pages

Elna eXpressive 850 User Manual - French - 138 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info