Manual Elna eXpressive 820 (page 96 of 116) (English, German, French)

614481

Zoom out

Zoom in

1/116

Embroidering with Optional Free Arm Hoop C

The dimension of the leg or sleeve opening must be large

enough to allow the hoop to move freely. Insert the inner

hoop of large hoop B into the opening .

If the inner hoop cannot be easily inserted, the opening is

too narrow for free arm embroidery.

Maximum distance for design position inside the opening

from the edge is 200mm (7-7/8”) .

Draw centerlines for design placement.

Remove extension table. See page 10.

Select hoop “C” in Edit Mode.

Select design or letters (dimensions or design/letters

must be 49mm or less).

NOTE: Built-in designs less than 49mm are 2, 4–9,

12–15, 17–20, 22–30, 35, 36, 38, 39, 45, 47, 48, 50–55

and 58.

Hoop fabric, aligning centerlines with hoop template

Place fabric around free arm and lock hoop onto carriage.

Roll up fabric edges so they will not be caught at the neck

of the free arm during embroidery sewing.

Insert the blocking plate (stored in the arm of the hoop)

next to the hoop opening. The blocking plate prevents

the fabric edge on the free arm from rolling back into the

embroidery area.

Touch the “Jog” keys to position needle directly over

centerline.

Sew design.

CAUTION: Immediately remove hoop from free arm after

sewing is completed. Never attempt to select a new

design, change modes or switch off machine without first

removing the hoop from the arm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXpressive 820 in the language / languages: English, German, French as an attachment in your email.

The manual is 14,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna eXpressive 820 Manual

Product: