614466
84
Zoom out
Zoom in
Previous page
1/90
Next page
80
Condition
The machine is noisy
and does not run
smoothly.
The needle thread
breaks.
The bobbin thread
breaks.
The needle breaks.
Skipped stitches.
The seam puckers.
The stitches form loops
underneath the fabric.
The fabric does not
feed smoothly.
The machine does not
work.
The buttonhole is not
correct.
Cause
1. Threads have been caught in the hook area.
2. The feed dog is packed with lint.
1. The needle is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is not inserted correctly.
5. The thread is either too heavy or too fine for the needle.
1. The bobbin thread is not threaded correctly in the bobbin
case.
2. Lint has collected in the bobbin case.
3. The bobbin is damaged and does not turn smoothly.
1. The needle is not inserted correctly.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. The needle is too fine for the fabric being sewn.
6. The stitch selection knob has been turned while the
needle was in the fabric.
1. The needle is not inserted correctly.
2. The needle is bent or blunt.
3. The needle and/or the thread are not suitable for the
fabric being sewn.
4. A stretch needle is not being used for sewing stretch, very
fine and synthetic fabrics.
5. The needle thread is not threaded properly.
1. The needle thread tension is too tight.
2. The machine is not threaded correctly.
3. The needle is too large for the fabric being sewn.
4. The stitch length is too long for the fabric.
5. The foot pressure dial is not set correctly.
6. Threads have been caught in the hook area.
Place lightweight tearaway stabilizer under lightweight
fabrics.
1. The needle thread tension is too loose.
2. The needle is either too large or too small for the thread.
1. The feed dog is packed with lint.
2. The pressure foot dial is not set correctly.
3. The stitches are too short.
4. The correct presser foot is not being used.
1. The machine is not plugged in.
2. A thread is caught in the hook area.
3. The flywheel is pulled out for bobbin winding.
4. The bobbin winder spindle is in the winding position.
1. The stitch length is not suitable for the fabric being sewn.
2. Interfacing is not being used with fabrics.
See page(s)
76
78
30
14
18
18
16
28
76
Replace
bobbin.
18
18
18
14
16
10
18
18
18
20
30
14
30
18
36
6
76
14
18
78
6
36
34
22
76
26
26
58, 62
58, 62
TROUBLESHOOTING
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXplore 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXplore 240 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info