Manual Elna eXperience 620 (page 26 of 98) (English, German, French)

614471

Zoom out

Zoom in

1/98

Pull open the buttonholder q to the back and place the

button in it. Push the holder together tightly around the

button.

Placing the button in the automatic buttonhole foot (R)

automatically sets the size of the buttonhole. The

buttonholder adjusts for buttons with a diameter between

0.5 cm (3/16˝) and 2.5 cm (1˝).

Pull the buttonhole lever down as far as it will go.

NOTE: The machine stops sewing and shows warning

message “bL” if the buttonhole lever is not lowered when

sewing buttonholes. Pull down the buttonhole lever and

start sewing.

Mark the buttonhole area on the fabric. Place both

threads to the left under the foot. Insert the garment

under the foot and hand turn the flywheel to lower the

needle at the starting point. Then lower the buttonhole

foot.

While sewing the buttonhole, the LED readout flashes

which portion is currently being sewn.

A flashing “.” in the LED readout signals that the

buttonhole is finished. Raise the presser foot and the “.”

disappears.

NOTE: If presser foot is not raised and another stitch is

selected, the warning message “UP” will appear.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 620 in the language / languages: English, German, French as an attachment in your email.

The manual is 6,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna eXperience 620 Manual

Product: