Manual Elna eXperience 620 (page 23 of 98) (English, German, French)

614471

Zoom out

Zoom in

1/98

Built-in Needle Threader

Press the “Up/Down Needle” key q until the needle is in

an up position. Turn OFF the power switch. Lower the

presser foot.

Lower the needle threader lever w as far as it will go.

Hook e is automatically inserted into the needle eye.

Bring the thread around guide r and under hook e.

Slowly release the lever while holding the thread end and

let the needle threader return to its original position. A

loop of thread t is pulled through the needle eye.

Pull the thread loop off the guide to the back and

manually bring the thread through the needle eye.

• The needle threader can be used with #11 to #16

size needles. Thread weight may vary from 30 to

100.

NOTE: Needle threader cannot be used with a twin

needle or wing needle.

If the needle threader does not catch a thread loop,

check the needle and positioning.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 620 in the language / languages: English, German, French as an attachment in your email.

The manual is 6,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna eXperience 620 Manual

Product: