704007
44
Zoom out
Zoom in
Previous page
1/84
Next page
42
t
NOTE:
Do not use the thread cutter button to cut the threads.
Otherwise, you cannot tie the threads.
Button Sewing
Machine settings
q Stitch pattern: MODE 1:10
w Thread tension: AUTO
e Presser foot: Satin stitch foot F
r Foot pressure: 5
t Feed dog: Lowered
Lower the feed dog.
Set the speed control slider at a slower speed.
Match the holes of button to the horizontal slot on the
presser foot.
Lower the foot to hold the button in place.
Adjust the stitch width so the needle will enter the left
hole of the button.
Turn the handwheel so that the needle will enter the right
hole of the button. Readjust the stitch width if necessary.
Stitch several times.
After you nish sewing, cut the threads but leave 7.5 cm
– 10 cm (3˝–) of threads at the end.
Pull the bobbin threads to bring the needle threads down
to the wrong side of the fabric.
Tie the threads together.
* After the button sewing is completed, raise the feed dog
for normal sewing.
e
q w
r
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 580 in the language / languages: English as an attachment in your email.

The manual is 18,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXperience 580

Elna eXperience 580 User Manual - German - 84 pages

Elna eXperience 580 User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info