704007
29
Zoom out
Zoom in
Previous page
1/84
Next page
27
Cutting Threads
To cut the threads after nishing sewing, press the thread
cutter button. The needle bar will automatically go up
after trimming the threads.
q Thread cutter button
NOTE:
The thread cutter button does not function when the
presser foot is up.
Use the thread cutter on the face cover to cut
specialized or thick threads if the auto thread cutter
does not work well.
To use the thread cutter on the face cover, remove the
fabric and draw it to the back.
Pull the threads up and slip them between the thread
cutter and face cover from behind.
Pull the threads toward you to cut.
w Thread cutter
w
q
Needle Plate Guides
The seam guides are marked on the needle plate, free
arm and hook cover.
The seam guides for 1/, 3/8˝ and 5/8˝ are also marked
on the front of the needle plate.
q Seam guides on the front of the needle plate
The numbers on the needle plate indicate the distance
from the center needle position in millimeters and inches.
w Center needle position
The cornering guides are very useful when turning a
square corner.
e Cornering guide
The angle scales on the needle plate are useful for
patchwork piecing (refer to page 60).
r Angle scales
Cornering Guide
To maintain a 5/8˝ seam allowance after turning a square
corner, use the cornering guide on the needle plate.
Stop sewing when the front edge of fabric reaches the
cornering guide lines.
Raise the presser foot and turn the fabric 90 degrees.
Lower the presser foot, and begin stitching in the new
direction.
q Cornering guide
w Fabric edge
q
w
5/8˝
w
e
q
r
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 580 in the language / languages: English as an attachment in your email.

The manual is 18,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXperience 580

Elna eXperience 580 User Manual - German - 84 pages

Elna eXperience 580 User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info