703988
50
Zoom out
Zoom in
Previous page
1/72
Next page
48
v Open the fabric after sewing is nished.
NOTE:
If the needle pierces too far left, the stitch will show
through on the right side of the fabric.
Blind Hemming
q Stitch pattern: MODE 1: 14
w Thread tension dial: 3 to 6
e Presser foot: Blind hem foot G
z Fold a hem with the wrong side of the fabric up to
form a 0.5 cm (1/4˝) allowance.
q Wrong side of fabric
w 0.5 cm (1/4˝)
(1) On heavyweight fabrics that tend to ravel, the raw
edge should be overcast rst.
(2) Fold the hem under the fabric for lightweight
fabrics.
x Place the fabric so that the fold is next to the guide on
the foot.
Lower the presser foot.
Adjust the needle drop position if necessary.
c Sew while guiding the folded edge.
e Folded edge
r Guide
Adjusting the needle drop position
Adjust the needle drop position as follows:
Press the “” sign on the stitch width adjusting key q to
move the needle to the right.
Press the “+” sign on the stitch width adjusting key q to
move the needle to the left.
q Stitch width adjusting key
The LCD display shows the distance between the
guide and left needle drop position in millimeters.
The needle drop position can be varied from 0.0 to 1.2.
NOTE:
The needle drop position can be moved, but the stitch
width will remain the same.
z
x c
v
q
w
e
r
q
w
(1)
(2)
4
w eq
q
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 570 a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 570 a in the language / languages: English as an attachment in your email.

The manual is 17,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXperience 570 a

Elna eXperience 570 a User Manual - German - 76 pages

Elna eXperience 570 a User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info