Manual Elna eXperience 520S (page 48 of 100) (English, German, French)

703992

Zoom out

Zoom in

1/100

Close zipper. Turn zipper face up (right seam

allowance forms a small fold at basting line) and

smooth zipper teeth away from seam. Attach foot

with right side pin. Reset straight stitch length to

2.5. Starting at the bottom, sew through the folded

seam allowance and zipper tape.

Stop just before the zipper foot reaches the slider

on the zipper tape. Lower the needle slightly into

the fabric. Raise the zipper foot and open the

zipper. Lower the foot and stitch the remainder of

the seam.

Close the zipper and spread the fabric flat with the

right side facing up. Baste through the opened

seam allowance and zipper tape.

Move the zipper foot to the left side pin. Guide the

edge of foot along the zipper teeth and stitch

through the garment and zipper tape. Stop about 5

cm (2˝) from the top of the zipper. Slightly lower

the needle into the fabric. Raise the foot, remove

the basting stitches from seam line and open the

zipper.

Lower the foot and stitch the remainder of the

seam, making sure the fold is even.

Remove remaining basting stitches.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 520S in the language / languages: English, German, French as an attachment in your email.

The manual is 3,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna eXperience 520S Manual

Product: