703992

Elna eXperience 520S Manual

34
Zoom out
Zoom in
Previous page
1/100
Next page
28
Drawing Up the Bobbin Thread
z
x
cv
e
w
e
r
z
x
c
e
w
q
w
q
zRaise the Presser foot lever.
Turn the power switch on.
Hold the needle thread with your finger.
xPress the Up/Down needle key e twice to pick up
the bobbin thread.
Draw up the needle thread q to bring up a loop of
the bobbin thread w.
c Slide 10 cm (4˝) of both threads to the back under
the presser foot.
Built-in Needle Threader
z Press the Up/Down Needle key q until the needle
is in an up position. Turn OFF the power switch.
Lower the presser foot.
Lower the needle threader lever w as far as it will
go. Hook e is automatically inserted into the
needle eye.
x Draw the thread from the guide r to the guide t.
The thread is caught under the hook e.
c Slowly release the lever while holding the thread
end and let the needle threader return to its
original position. A loop of thread is pull through the
needle eye.
v Pull the thread loop off the guide to the back and
manually bring the thread through the needle eye.
NOTE:
• The needle threader can be used with #11 to #16
size needles. Thread weight may vary from 30 to
90.
• Needle threader cannot be used with a twin needle
or wing needle.
If the needle threader does not catch a thread loop,
check the needle and positioning.
t
q
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 520S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 520S in the language / languages: English, German, French as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info