703989
10
Zoom out
Zoom in
Previous page
1/52
Next page
8
Machine Operating Buttons
e
r
w Reverse button
• When following stitch patterns are selected:
The machine will sew in reverse as long as the
reverse button is pressed. Release the button to sew
forward.
When the machine is stopped and foot control is
disconnected, the machine will sew in reverse slowly
as long as the reverse button is pressed. Release the
button to stop the machine.
• When any other stitches are selected:
If you press the reverse button when sewing any other
patterns, the machine will immediately sew locking
stitches and automatically stop.
There will be particular functions of the reverse button
when patterns shown above are selected. Refer to
pages 24, 29 and 30 for instructions.
• When following stitch patterns are selected:
e Auto-lock button
• When following stitch patterns are selected:
Press the auto-lock button to sew a locking stitch
immediately. The machine will automatically stop.
• When any other stitches are selected:
Press the auto-lock button to sew a locking stitch
at the end of current pattern. The machine will
automatically stop.
w
r Needle up/down button
Press the needle up/down button to bring the needle up
or down.
Needle stop position
When you start the machine with the needle at up
position, the needle stops at up position when the
machine is stopped.
When you start the machine with the needle at down
position, the needle stops at down position when the
machine is stopped.
q Start/Stop button
Press this button to start or stop the machine.
The machine starts running slowly for the rst few
stitches, and it then runs at the speed set by the speed
control slider.
The machine runs slowly as long as this button is being
pressed.
q
NOTE:
The start/stop button cannot be used when the foot
control is connected to the machine.
10


Need help? Post your question in this forum.

Forumrules
1

Forum

elna-experience-450

Reset search

  • i don t know where the speed button is to fill the bobbin properly
    Submitted on 26-7-2021 at 07:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 450 in the language / languages: English as an attachment in your email.

The manual is 18,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXperience 450

Elna eXperience 450 User Manual - German - 52 pages

Elna eXperience 450 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info