704011
94
Zoom out
Zoom in
Previous page
1/112
Next page
92
q
w
Foot Height for Free Motion Quilting
When “Straight stitch 2” or “Zigzag stitch 2” is selected,
the height of down position of the free motion quilting feet
(QC, QO, QV) is optimized automatically.
However, you can ne tune the foot height according to
the quilt thickness.
Place the fabric under the foot and lower the foot.
Press the foot height key and the adjusting window
opens. Adjust the foot height by pressing the “+” key or
–” key and press the OK key to register the setting.
w Foot height key
Reduce the height if the fabrics bounce when sewing.
Increase the height if the foot gets trapped in the fabrics
when sewing.
NOTE:
Purple tip needle is recommended for free motion
quilting to prevent skipped stitch.
Do not move the quilt layers toward you when the
open-toe foot is attached.
Free Quilting
For ordinary and bulky quilts, select “Straight Stitch 1” or
“Zigzag Stitch 1, and use the darning foot PD-H (refer to
page 23 for how to attach the darning foot).
Select the “Straight Stitch 2” or “Zigzag Stitch 2” for atter
quilts and use the free quilting foot QC, QO or QV.
Refer to page 87 (button sewing foot) for how to attach
the free quilt feet.
One Stitch Off
The machine stops automatically after sewing one stitch
so that you can bring the bobbin thread up to prevent it
from bunching up on the wrong side of the fabric.
Hold the needle thread and sew one stitch and the
machine stops automatically.
Pull the needle thread up to bring the bobbin thread up.
Hold both the needle and bobbin threads and sew
several stitches to secure the threads.
You can trim the thread tails with scissors.
The machine will stitch continuously when you resume
sewing.
If you wish to start sewing without “one stitch off, press
the one stitch off key to cancel this function.
The key icon changes to .
When “one stitch off” is active, the key icon shows .
q One stitch off key
To sew
Sew at medium speed while guiding the fabric with your
hands.
Move the quilt 3 mm or less per stitch.
Sculpture Stitches
These stitches are used to accentuate design outlines
and to create a mock hand-quilt.
94


Need help? Post your question in this forum.

Forumrules
1

Forum

elna-excellence-780

Reset search

  • my elna 780+ automatic needle threader won't thread Submitted on 13-4-2022 at 21:58

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXcellence 780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXcellence 780 in the language / languages: English as an attachment in your email.

The manual is 16,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXcellence 780

Elna eXcellence 780 User Manual - German - 112 pages

Elna eXcellence 780 User Manual - French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info