Manual Elna eXcellence 780 (page 89 of 112) (English)

704011

Zoom out

Zoom in

1/112

Button Sewing

When attaching a button to thick fabric, you need to

make a shank by using the button shank plate.

Select “Shank” Lower the feed dog.

Attaching the button sewing foot T

Make sure to press the lockout key to lock the machine.

Insert the rear pin of the foot into the rear groove of the

foot holder.

q Rear pin

w Rear groove

Gently lower the presser foot lifter while holding the foot

with your nger to t the foot. Press the lockout key to

unlock the machine.

Place a button on the fabric and lower the needle into the

left hole of the button by turning the handwheel with your

hand.

Insert the button shank plate under the button.

Lower the foot to hold the button in place, aligning the

direction of the button.

e Button shank plate

Raise the needle by turning the handwheel until the

needle bar swings to the right.

Press the “+” or “–” key so the needle enters into the right

hole of the button. The maximum stitch width is 0.7 cm

(1/4˝).

Start sewing and continue until the machine stops

automatically.

Remove the fabric from the machine.

Cut the all threads leaving at least 10 cm (4˝) tails.

Trim the thread at the beginning close to the fabric.

Pass the needle thread at the end of stitching through the

left hole in the button, between the button and fabric.

Pull the needle thread to bring the bobbin thread up to

the right side of the fabric.

r Needle thread at the end

t Bobbin thread

Wind the threads to form a shank and knot them together.

NOTE:

The button shank plate cannot be used if the button is

too thick.

my elna 780+ automatic needle threader won't thread Submitted on 13-4-2022 at 21:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXcellence 780 in the language / languages: English as an attachment in your email.

The manual is 16,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXcellence 780

Elna eXcellence 780 User Manual - German - 112 pages

Elna eXcellence 780 User Manual - French - 112 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna eXcellence 780 Manual

Product: