704011

Elna eXcellence 780 Manual

67
Zoom out
Zoom in
Previous page
1/112
Next page
65
q
Twin Needle Sewing
Some of the utility stitches and decorative stitches can
be sewn with a twin needle.
Replace the needle with the twin needle supplied with
the standard accessories.
CAUTION:
Turn the power switch off or press the lockout key
before changing the needle.
Do not use twin needles other than the one included
in the standard accessories, otherwise the needle
may hit the needle plate, foot or hook and break.
q Lockout key
Insert the extra spool pin into the hole under the top
cover.
Place a spool of thread and the felt on the additional
spool pin and the spool stand (refer to page 14).
w Extra spool pin
Draw both threads from the spools and pass them
through the threading points from z to v.
Slip the thread A through the needle bar thread guide b,
then pass through points n and m as illustrated.
Thread the thread B through the front hole of needle bar
thread guide b, then pass it through the needle hole ,.
Make sure that the two strands of thread from the spools
do not get tangled.
NOTE:
• Threading from points z to v is the same as for a
single needle (refer to page 17).
• The needle threader cannot be used with the twin
needle.
Press the twin needle key and select the desired pattern.
Patterns not suitable for twin needle sewing cannot be
selected (pattern selection keys are grayed out).
Buttonholes, specialty stitches and monogram cannot be
selected.
e Twin needle key
NOTE:
• When you sew patterns with the twin needle, test
the stitches rst before you sew on the garment.
• Use the zigzag foot A or satin stitch foot F for twin
needle sewing.
• Use the threads #60 or ner.
• When changing the sewing direction, raise the
needle and presser foot then turn the fabric (foot
up for pivoting option is not available when the twin
needle is selected).
• Use the thread cutter on the face plate when
cutting threads.
After twin needle sewing is nished, press the twin
needle key and the warning message will appear.
Press the OK key and replace the twin needle with a
single needle.
w
z
x
c
v
b
n
m
,
A B
e
… 67 …


Need help? Post your question in this forum.

Forumrules
1

Forum

elna-excellence-780

Reset search

  • my elna 780+ automatic needle threader won't thread Submitted on 13-4-2022 at 21:58

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXcellence 780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXcellence 780 in the language / languages: English as an attachment in your email.

The manual is 16,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXcellence 780

Elna eXcellence 780 User Manual - German - 112 pages

Elna eXcellence 780 User Manual - French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info