704009
9
Zoom out
Zoom in
Previous page
1/112
Next page
7
Machine Operating Buttons
q Start/stop button
Press this button to start or stop the machine.
The machine starts running slowly for the first few
stitches, it then runs at the speed set by the speed
control slider. The machine runs slowly as long as this
button is pressed.
The button will turn red when the machine is running, and
green when it has been stopped.
Pressing and holding this button while sewing will slow
down the sewing speed and the machine will stop when
the button is released.
NOTE:
•Thestart/stopbuttoncannotbeusedwhenthe
foot control is connected to the machine.
•Themachinewillnotstartifthepresserfootisup
and the LCD screen shows message (A) or (B).
Lower the presser foot and start the machine
•Youcanselectthedesiredstart-upspeedfrom
slow, normal or high (refer to page 30).
w Reverse button
When sewing stitch pattern D1 (D1S), D4 (D4S), D96,
D97 (D97S), D98 (D98S), 9-11 or 162-165, the machine
will sew in reverse as long as the reverse button is
pressed.
If the same stitch above has been selected and the foot
control is not connected, the machine will start sewing in
reverse as long as the reverse button is pressed.
If you press the reverse button when sewing any other
patterns, the machine will immediately sew locking
stitches and automatically stop.
e Auto-lock button
When sewing stitch pattern D1 (D1S), D4 (D4S), D96,
D97 (D97S), D98 (D98S), 9-11 or 162-165, the machine
will immediately sew locking stitches and automatically
stop when the auto-lock button is pressed.
When sewing all other patterns, the machine will sew to
the end of the current pattern, sew locking stitches and
stop automatically.
The machine will trim the threads automatically after
locking the stitch when the auto thread cutting option is
turned on.
q
w
e
r
t
y
u
q
w
e
r
u
t
i
(A) (B)
NOTE:
The LED signal i is turned on when the auto thread
cutter is selected (refer to page 87).
Use the thread cutter on the face cover if the thread is
#30 or thicker.
i
y
NOTE:
The LED signal y is turned on when the auto-lock is
selected.
r Needle up/down button
Press this button to bring the needle bar up or down.
The machine will stop with the needle in down position.
However, you can change the needle stop position in the
setting mode (refer to page 30).
NOTE:
The LED signal u is turned on when the down
position is selected or vice versa.
t Thread cutter button
Press this button when you finish sewing to trim the
threads. The needle bar automatically rises after trimming
the threads (refer to page 34).
9


Need help? Post your question in this forum.

Forumrules
1

Forum

elna-excellence-760-pro

Reset search

  • La canette tape contre la plaque et la machine est devenue très bruyante. Un morceau de tissu a été " avalé " par la machine . J'ai alors enlevé a plaque à aiguille, le morceau de tissu , nettoyé la machine et remis le porte canette repère rouge sur repère rouge. Malheureusement , depuis, je peux coudre, mais c'est très bruyant et j'ai peur d'abimer la machine. Avez -vous une idée pour résoudre ce problème ? Merci Submitted on 31-12-2021 at 00:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXcellence 760 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXcellence 760 Pro in the language / languages: English as an attachment in your email.

The manual is 11,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXcellence 760 Pro

Elna eXcellence 760 Pro User Manual - German - 112 pages

Elna eXcellence 760 Pro User Manual - French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info