614479
34
Zoom out
Zoom in
Previous page
1/96
Next page
32
Dual Feed Balancing Dial
The dual feed balancing dial should be set at “0”.
However, you may need to adjust the dual feed balance
with this dial since the effect of the dual feed varies
depending on the type of fabric.
Test sew on scrap piece of the fabric you intended to sew
to check the feed balance.
(A): If the lower layer puckers, turn the dual feed
balancing dial toward “+.
(B): If the upper layer puckers, turn the dual feed
balancing dial toward “–”.
q Dual feed balancing dial
w Upper layer
e Lower layer
Set the feed balancing dial to “0” after the dual feed
sewing.
NOTE:
Reducing the foot pressure will also improve the feed
balance.
Sewing with the Dual Feed Device
The following stitch patterns can be sewn with the dual
feed device.
Mode 1: 1, 2, 3, 4, 1S, 2S, 3S, 4S
Mode 2: 01, 02, 03, 04
Mode 3: 01, 02, 03, 04
The dual feed device is extremely effective for sewing
with hard to feed material such as vinyl or leather. It also
eliminates layer slippage.
NOTE:
See page 1415 for how to attach the dual feed foot
and to engage the dual feed device.
Sewing
Raise the presser foot and position the fabric edge next
to a seam guide on the needle plate. Lower the needle at
the point where you wish to start.
Pull the needle and bobbin thread toward the rear.
Lower the presser foot.
Start sewing at medium speed. Gently guide the fabric
along the seam guide letting the fabric feed naturally.
When seaming plaid fabrics, match the plaids of the upper
and lower layers and pin them together.
q
w
e
w
e
(A)
(B)
Mode 1
Mode 2 Mode 3
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXcellence 730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXcellence 730 in the language / languages: English as an attachment in your email.

The manual is 8,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info