703997
11
Zoom out
Zoom in
Previous page
1/96
Next page
9
LCD Screen and Function Keys
q LCD screen
The LCD screen shows the following information when the
machine is turned on:
w Stitch pattern
e MODE
r Stitch pattern number
t Recommended type of presser foot
y Stitch width
u Stitch length
i MODE key (refer to page 25)
Press the MODE key to select the mode.
When the power is turned on, the direct pattern selection
(MODE 1) is set automatically.
o Cursor key (refer to pages 83, 84, 86)
Press “ ” or “ ” to move the cursor to check or edit
the pattern combination.
!0 Auto thread cutting key (refer to page 76)
Press this key if you wish to cut the threads automatically
after finish sewing with a locking stitch.
When programming a pattern combination, press this key
to cut the threads automatically after finish sewing.
!1 Stitch width adjusting key (refer to pages 31, 40, 50)
Press this key to alter the stitch width.
!2 Stitch length adjusting key (refer to pages 31, 40, 50)
Press this key to alter the stitch length.
!3 Number keys (refer to page 25)
Enter a 2-digit pattern number to select the desired stitch
pattern in modes 1 to 6.
!4 Clear key (refer to pages 27, 84)
Press the clear key to clear the memorized stitch pattern.
Press and hold this key until the buzzer sounds to delete
the whole pattern combination.
!5 Memory key (refer to page 74)
Press this key to register programmed pattern
combinations.
Up to 50 stitch patterns combination can be memorized.
!6 Elongation key (refer to page 69)
Press this key to elongate satin stitch patterns.
!7 Twin needle key (refer to page 73)
Press this key when sewing with a twin needle.
!8 Mirror image key (refer to pages 77)
Press this key to sew a mirror image of the selected
pattern.
!9 Set key (refer to page 26)
Press this key to enter the setting mode for customizing
the machine settings.
@0 Startover key (refer to page 78)
Press this key to sew a pattern combination from the
beginning.
@1 Lockout key (refer to page 13)
Press this key to lockout the machine when threading the
machine, replacing the accessories etc.
To reduce the risk of injury, all the buttons and keys are
deactivated.
To unlock the machine, press this key again.
@2 Direct pattern selection keys (refer to page 25)
Youcanselectthestitchpatterns01,04,11,and23
in MODE 1 directly.
When the straight stitch needle plate is being attached,
you can select the stitch patterns 01S or 04S only.
w
y u
e
!7
!9
!8
@0
@1
r
t
q
i
o
!0 !1 !2
!4
@2
!6!3
!5
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXcellence 730 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXcellence 730 Pro in the language / languages: English as an attachment in your email.

The manual is 22,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXcellence 730 Pro

Elna eXcellence 730 Pro User Manual - German - 96 pages

Elna eXcellence 730 Pro User Manual - French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info