614477
182
Zoom out
Zoom in
Previous page
1/196
Next page
176
Reason
Machine will not sew with the Start/Stop
key because the foot control is connected.
The Twin Needle Key has been pressed
after selecting a stitch that is not
compatible with a twin needle inserted.
The Elongation Key has been pressed
after selecting a stitch that cannot be
elongated.
The Elongation Key has been pressed
after selecting a stitch that cannot be
elongated.
Auto thread cutting was interrupted by
power switching off machine. Power
switch is turned on again and auto thread
cutting must be completed.
The presser foot was raised and auto
thread cutting was not completed.
Machine stops because thread is not in
take up lever or tangled in bobbin area.
Feed dog was lowered during sewing.
Bobbin winder spindle locks during bobbin
winding.
The machine is malfunctioning because of
the item indicated. Example: “E1 error”
error in initialization of stepping motor.
The LCD screen is abnormal.
Message What to Do
Unplug the foot control.
Select a different stitch or
sew with a single needle.
Elongation can only be
used with satin stitches
081 – 090.
Lower the feed dog.
Press the “Auto Thread
Cut” key.
Lower presser foot. Press
the “Auto Thread Cut” key.
Place thread in take up
lever or remove tangled
thread from bobbin area
and auto thread cutting
mechanism. Wait 15
seconds before restarting.
Do not move feed dog
lever during sewing.
Turn off power switch.
Remove tangled thread.
Contact your authorized
Elna dealer or service
center where you
purchased your machine.
Turn power switch off.
Wait 5 seconds and turn
power switch on.
182


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXcellence 720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXcellence 720 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info